Get matched with top fireplace pros in Brewster, MN

A fireplace that doesn’t require a chimney is simply called a chimneyless fireplace. Don’t confuse these with ventless fireplaces, however. There are some fireplaces that require ventilation via a system of pipes, not a chimney. More specifically, the fireplace in question will likely be called by its name, such as electric, ethanol, or balanced flue.

Gas fireplace repair costs an average of $600, but prices can vary widely depending on the issue, parts needed, and service provider. Simple repairs like cleaning or pilot light adjustments may cost between $75 and $200, while more significant repairs involving component replacement can cost $1,000 or more. The overall cost typically falls within the $100 to $2,500 range.

Typical price ranges for repairing different components of a gas fireplace are:

• Thermocouple: $75 to $350

• Thermopile: $75 to $350

• Gas valve: $150 to $300

• Pilot light: $100 to $350

• Igniter: $100 to $150

• Mantel: $500 to $1,200

• Hearth: $150 to $800

Yes, you can put a freestanding one in a corner if you’re tight on space. Because pellet stoves don’t get as hot as other types of wood stoves, there only needs to be 3 inches of clearance from the wall on each side. Placing it in a corner should not impact the ventilation—you’ll still need to follow safety precautions by not installing too close to a window. Typically, it’s 4 feet from a window or 18 inches if the stove uses an external air source for combustion. Always check the owner’s manual for specific instructions.

Shiplap can be safe for a gas fireplace, but you should consult with a fireplace installation pro before proceeding. You need to make sure your project meets building and safety codes since shiplap is made from flammable wood. You may need to install another non-combustible material, like stone or brick, around the fireplace for a certain amount of space before you can add shiplap.