Best septic tank pros near Kenyon, MN

The best times of year to pump or empty a septic tank are spring and fall. Many professionals recommend spring because the ground has thawed, making the tank easier to access, and any snowmelt or rainfall can aid in proper drainage. Pumping before summer is also ideal to avoid conflicts with vacations or outdoor gatherings.

Fall is another great option, as contractors may be less busy than in the spring. Servicing the tank in late fall or early spring can also reduce the risk of overflow from extra precipitation during winter and spring.

While summer is a possibility, winter is generally not recommended. The ground is often frozen, which can make it difficult to access the tank, and the waste inside may also be frozen.

Your septic tank naturally contains the good bacteria it needs, so you typically don't have to add more as the system produces them on its own. However, if you wish to replenish the bacteria, you can use natural methods. For example, you can add three rotten tomatoes to your garbage disposal or flush 1/4 ounce of active yeast down the toilet every three months. While store-bought septic enzymes and chemicals are available, many additives are unnecessary and may even harm your system. The most effective way to maintain a healthy bacterial balance is to avoid using chemical drain cleaners, which can kill the beneficial bacteria in your tank.

The average cost to replace a septic tank or install a new system is typically around $7,350, with a broader average range of $5,000 to $12,000. However, total project costs can vary widely, from $5,000 to as much as $22,500. Key factors influencing the price include the size and type of the septic system, the tank material, and the size of your house.

It's important to distinguish between the cost of the tank itself and the cost of the entire system installation, which is significantly more. For the tank alone, costs vary by size:

• A tank for a one-bedroom house typically costs $500 to $900.

• A 1,000-gallon tank, suitable for most one- to three-bedroom homes, costs between $900 and $1,500.

• A tank for a five- or six-bedroom home generally costs $1,200 to $1,600.

Bladder and diaphragm well pressure tanks are usually pre-charged at the factory. Even so, it’s important to check the air pressure in the tank using a tire pressure gauge on the relief valve. The instruction manual usually calls for 28 psi. Use a hand pump to add more air or release some air from the tank to reach the desired number. Check the pressure periodically to see if you need to add more air to the tank.