Get matched with top insulation pros in Erie, MI

Yes, even though frost-free and freeze-proof faucets are designed to withstand winter weather, it is still recommended to cover them with an insulated cap, especially during periods of extreme cold. These faucets work by keeping excess water inside the home's heated space and using a downward slope to drain, but this protection can be compromised. For the faucet to work correctly, you must always disconnect any attached hoses before temperatures drop below freezing, as a hose can trap water and lead to freezing. Ultimately, covering all outdoor faucets, even freeze-proof models, is the best way to prevent frozen and burst pipes.

On average, insulating an attic costs about $2,500, with a typical range of $1,500 to $3,500. The final price often depends on the attic's size, with costs generally falling between $1 to $3 per square foot. For example, insulating a 1,800-square-foot attic would likely cost between $1,800 and $5,400.

If the project involves removing old insulation, this can add an average of $900 to the total cost, bringing a full removal and reinsulation project to around $3,000.

Several factors influence the overall cost:

• Insulation Type: Prices per square foot vary significantly by material.

• Reflective: $0.50–$1.50

• Blown-in: $1–$4

• Batt: $2–$4

• Loose-fill: $2–$5

• Spray foam: $2–$5

• Structural insulated panels (SIPs): $4–$7

• Project Complexity: Factors like sealing air leaks, poor attic accessibility, and required inspections can add to the cost.

• Removal Issues: The discovery of mold, asbestos, or pests during the removal of old insulation can substantially increase the price.

R-value stands for resistance value and is a number assigned to insulation that states how good the insulation is at heat transference (insulation). The R-value of injection foam is around 4 which homeowners will be happy to know is actually quite good. Another benefit of injection foam versus fiberglass foam is that the colder it gets, the more injection foam retains its resistance properties, whereas fiberglass tends to lose its efficiency in colder temperatures.

If you have blown-in insulation, using an insulation vacuum will quickly and easily suck up all the insulation. Many come with built-in HEPA filters for added safety. While some people suggest breaking up large batts and feeding them into the vacuum, this can expose you to more fiberglass fibers. With batts and rolls, carefully removing them and placing them into garbage bags is a better process.