Top-rated drywall insulation pros.

Get matched with top drywall insulation pros in North Beach, MD

Enter your zip and get matched with up to 5 pros

Need a pro for your drywall insulation project in North Beach, MD?

Select your specific project to find the pro for you.

TRUSTED BY NORTH BEACH, MD HOMEOWNERS

  • Average homeowner rating star icon4.7
    Average homeowner rating
  • Verified reviews icon119
    Verified drywall insulation services reviews

Find Drywall insulation pros in North Beach

Avatar for Complete Home Solutions, LLC
Complete Home Solutions, LLC
3.9(
84
)
Blown-In Insulation - Install or Upgrade

Serving North Beach, MD and surrounding areas

Approved

In business since 2002

Free estimates

Warranties offered

"The Complete Home Solutions' crew that handled my attic's insulation project was informative, professional and timely. They explained their processes start to finish, answering all questions along the way. Even in the face of obstacles due to the nature of my unique attic, they overcame and completed the project on-time and to complete satisfaction, absolutely astounding job! A giant thank you to the crew; Brad, TJ, JB, Jeremy, Anthony, and Jason!"
 Stone Front of Addition
 Kitchen
 .
 After
Screened Porch and Deck

+93

Response time1 day
6 neighbors recently requested a quote
Recommended by74%of homeowners
Avatar for Home Genius Exteriors
Home Genius Exteriors
4.9(
437
)
Blown-In Insulation - Install or Upgrade

Serving North Beach, MD and surrounding areas

Approved

In business since 2004

Free estimates

Credit card accepted

"Home Genius Exterior just completed phenomenal work at my property!! Windows and insulation done. â … Top notch service from the consultation, to the schedule work, the start of the tear down, the installing and the final clean up. Highly recommend this company for your home service. Thank you for the hard work and service!"
Roofing
Roofing
Roofing
Roofing
Roofing

+77

Recommended by86%of homeowners
Avatar for Elite Thermal East
Elite Thermal East
4.3(
105
)
Blown-In Insulation - Install or Upgrade

Serving North Beach, MD and surrounding areas

Approved

Super Service Award Winner

In business since 2021

Free estimates

Credit card accepted

"Chad was very helpful, informative and gave us exactly what was needed and asked for our ceiling project. Not one complaint. Job was completed on time, work area cleaned, insulation had the desired effect. Not once complaint - Thank you Elite Thermal for a stress free job! Its a rare experience in construction projects!!"
Cellulose Blown Insulation - Rem/Repl Before/After
Cellulose Blown Insulation - Before/After
Cellulose Blown Insulation - Before/After
Fiberglass Batt - Before/After
Fiberglass Batt - Remove & Replace - Before/Af

+5

Response time1 day
Response rate95%
76 neighbors recently requested a quote
Advanced Green Home Solutions
New to Angi
Blown-In Insulation - Install or UpgradeInjection Insulation - Install

Serving North Beach, MD and surrounding areas

Approved

In business since 2021

Free estimates

Credit card accepted

Advanced Green Home Solutions is dedicated to providing our customers with the best quality and craftsmanship. We are here to build relationships with our customers and communities and to provide our employees with a great place to work. Advanced Green Home Solutions is a leader in providing our customers with the highest quality products and craftsmanship in an honest, efficient, and professional way. Our pledge is to create successful relationships with our customers, employees and community by building trust, treating every project with the utmost integrity and exceeding expectations. We look forward to working with you!

Response time2 days
Accurate Insulation - Home Facebook
4.2(
152
)
Blown-In Insulation - Install or UpgradeInjection Insulation - Install

Serving North Beach, MD and surrounding areas

In business since 2005

Free estimates

Credit card accepted

"We needed insulation applied only to the underside of the house at this time. The guy who came out to give an estimate was great. The guy that came out to do the spray job (I expected a team and got just one guy) was super nice. The spray foam would appear to be difficult to manage during application as some spots only have a skim of insulation while others seem to have 7 inches of it. The office..... trying to get any information from that office.... was a hassle way beyond my wildest nightmares. Getting the estimate took days, getting scheduled took days. They have only one person working to do all of the scheduling and she "is out of the office" during a whole heck of a lot of "our office hours are from...". Figuring out what I needed to know to pay online took pulling teeth. It was the best price I got and it will make a world of difference to that house structure and its moisture issues.... but good grief!"
Response time2 days
Recommended by97%of homeowners
Cameron Home Insulation
4.6(
40
)
Blown-In Insulation - Install or UpgradeInjection Insulation - InstallInsulation - Install or Upgrade

Serving North Beach, MD and surrounding areas

In business since 1907

Free estimates

Credit card accepted

"Debbie, the AC&R salesperson, was very knowledgeable and confident. They were the 2nd quote I got for work and came in even lower than I expected (which gave me pause as a low bid is a red flag). But true to her word, they did the work professionally (mostly...see below) and promptly. While I had another company do the energy audit for the Pepco rebate, AC&R took over the work, did the blown fiberglass one day and the spray foam the next.



For the blown fiberglass in the attics above our additions, they added spray foam (from a can) around any gaps per the contract and foam board baffles at the soffits. The installer noted that all our soffits were blocked and the batting insulation was too wide for the rafter channels, so he leveled it out as best he could to ensure an even coating of blown insulation. At the end, he sealed up the gaps between the attic and our to-be-finished upstairs (cape cod style, so all one room).



For the spray foam insulation, the team came in the next day, and I had to be out of the house due to fumes. I did come back around noon as they expected to be done well before then. They didn't know I came in and I went to the back of the house to watch TV on my work break. The one annoyance was during their cleanup, one of the installers came down into our kitchen and then saw me. He said he was looking for a vacuum cleaner to clean the stairs. I told him don't worry about the carpet as it was getting pulled up, but this was the one piece of unprofessionalism I noted above. Contractors should NEVER use the homeowner's property; they should bring their own tools, including vacuums!



While the spray foam can get very messy, they kept the splatter mostly contained to inside the crawlspace, not the finished flooring. However, I was surprised that they didn't tape off the outlet covers or light switched. since the particles are so small, we're going to have to replace the switches/receptacles at our cost. Also, there was a storm door screen that wasn't covered and now needs cleaned. Basically, I think they should have taken more care in covering the very few items we left upstairs and the outlets/switches.



They didn't spray around the window frames (large gaps where window weights used to be) because the open cell foam would expand too much. If I wasn't there, I think they would have just left, but it was clear in our contract discussions they needed to insulate those spaces too. They used a few cans of "Good Stuff" equivalent, but didn't fill in the gaps entirely. It did the job well enough, but it's a ding against them as I expected more preparation.



Lastly, I thought that AC&R would walk me through all the scheduling and final "test out" (for the Pepco rebate), but I had to contact them and schedule with someone different each time. They were always prompt, but I expect the experts to know to do this for/with me rather than expect me to know the process. I go through it once in a lifetime while they do it weekly.



While the end of the review sounds more negative than positive, I would definitely recommend AC&R out to others as they're priced right, they have been in business for over a century, and like any contractor, you just need to follow up to be sure everything is done to your satisfaction.
"
Recommended by100%of homeowners
Avatar for Mark Group
Mark Group
4.4(
467
)
Blown-In Insulation - Install or UpgradeInjection Insulation - InstallInsulation - Install or Upgrade

Serving North Beach, MD and surrounding areas

In business since 1974

Free estimates

Credit card accepted

"Person who visited was very polite and noted that what I purchased was likely not something that would meet my expectations.  I wanted an energy audit, how my systems could be improved in home, lighting, heating, insulation and air conditioners.  What I got was a list of things they could work on and the price to do that work.  The work list in no way was considered an energy audit, rather it was a punch list of things I could do based on their visual inspection.  I did not have a comparison of work and benefit/savings calculation.  There was no checklist of inefficiencies and how that translated into energy losses. For example, multiple hi hat lights in house, they spoke about boxing and insulating a few, less than 10, when I have almost 90 in house.  Overall I was disappointed, the tech who came said the offering needed to be better presented prior to start of work."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+14

Recommended by83%of homeowners
METRO INSULATION, LLC.
2.9(
98
)
Blown-In Insulation - Install or UpgradeInjection Insulation - InstallInsulation - Install or Upgrade

Serving North Beach, MD and surrounding areas

In business since 2004

Credit card accepted

"
Company personnel scheduled to do the work on a semi holiday and they arrived on time/when they said they woudl.  They were very attentive to doing a good job - they lined the floor with plastic; they vacuumed up excess insulation).  They even phoned up days after completing the project to inform us that we might be able to take advantage of a tax benefit.  We would definitely recommend this company."
Recommended by87%of homeowners
Contractors Unlimited Co
5.0(
10
)
Blown-In Insulation - Install or UpgradeInjection Insulation - InstallInsulation - Install or Upgrade

Serving North Beach, MD and surrounding areas

In business since 1989

Emergency services offered

"We had a horrendous situation with a basement floor installation that went wrong leaving our house full of fumes, and a week later we discovered our basement was contaminated by asbestos in the process.  When we called Bill and Contractors Unlimited, they were extremely responsive.  Although other companies gave us bids, Bill was able to work his schedule to fit us in weeks sooner than the others.  Although the cost was a bit more, that saved us money because we were displaced and could not even go into our house because of the fumes.  CU set up negative air machines to replace the air, they followed asbestos abatement laws, they cleaned every item that could be salvaged in our house.  They even saved more than we thought which really reduced our overall expense.  Bill and his team were extremely professional, friendly, helpful, and really went out of their way to ease our stress from this situation.  At the end of their process, Bill arranged for a air quality inspection which we happily passed - able to return home.  I would gladly recommend Contractors Unlimited for asbestos abatement.  I just wish we had called them before the floor guys  created such a disaster.  Thank you Bill!
"
Recommended by100%of homeowners
Showing 1-10 of 48
Drywall Insulation questions, answered by experts

You can put certain types of plaster over other types, but doing so isn't always the best idea. For example, putting a coat of gypsum over lime plaster is possible, but doing so will limit the lime plaster's breathability and potentially affect its performance.

Since cement plaster tends to leave a textured surface, no matter how much you smooth it, some people prefer to use gypsum plaster as a topcoat over cement plaster, creating a smoother surface.

There are six levels of drywall finish, from 0 to 5, that refer to the amount of work performed during the finishing process.

Level 0: Drywall is hung with no finishing work.

Level 1: Tape is placed over the seams between drywall sheets.

Level 2: A thin layer of mud is applied over the tape and screw holes. This level is common for utility rooms or walls that will be covered.

Level 3: A full coat of mud covers the screw holes and tape, but the surface is not sanded. This is often used in garages.

Level 4: This is the most common finish for visible interior walls. It involves applying two coats of mud over seams and screw holes, with sanding between each coat, creating a smooth surface ready for flat paint.

Level 5: This is a high-end finish for luxury homes. It includes full taping, mudding, and sanding, plus a final skim coat over the entire surface before painting.

All plaster walls will crack over time due to normal house settling and expansion and contraction from temperature and moisture changes. Small, thin hairline cracks are generally not serious and are mostly a cosmetic issue. However, larger or more significant cracks can indicate structural problems.

Here's how to tell the difference:

  • Cosmetic Cracks: Cracks that are 0.5 cm (0.2 inches) or thinner are typically cosmetic.

  • Structural Cracks: Cracks wider than 0.5 cm, excessive or deep cracks, multiple cracks in the same area, or cracks that span around corners can signify a structural or foundation issue. Cracks along the joints where walls meet the ceiling also warrant attention.

For cracks wider than 0.5 cm, structural repair is needed. If a crack is 2.5 cm (1 inch) or wider, or if you notice any signs of a structural problem, it is best to contact a plaster repair professional to assess the damage.

Whether you apply the drywall mesh before or after drywall mud depends on the type of patch it is. For self-adhesive patches, you’ll put the patch down first and then coat it with mud. Mesh patches that are not self-adhesive will require you to put mud down first and then press the mesh into it, followed by additional coats of mud.

Professionals mount TVs using specialized tools and knowledge of different wall materials, ensuring safe support.

The North Beach, MD homeowners’ guide to drywall insulation services

From average costs to expert advice, get all the answers you need to get your job done.