Get matched with top drain pipe installers in Groton, MA

"Mr. Solivan was on time, he communicates well. As requested he removed my garbage disposal and connected the drains. That didn't resolve a slow draining problem. He had time to take care of that as well. Everything about his work was fine. The charge was reasonable. I am totally satisfied and would use him again."

"Highly recommend Alex for your needs, he installed 2 brand new toilets for us and got it done super quick and we ran into no issues with having him as our plumber. He works very efficiently and the work is top notch!! Would hire again for all future needs and I recommend you to also!"

"Rezysave will be our go to plumbing service from now on. They were responsive, on time, professional, and nice. Mike and Justin stuck it out through a hot day and a couple of complications (not of their doing, but having to do with our pipes), and patiently calmed my nerves the day before a holiday weekend! Highly recommend!"

"I did everything I can to clear the blockage in my kitchen sink drain but it is totally blocked. I called Milltown Plumbing in the morning and they expected to send someone over later the day or the next day depends on how quick they can finish other works. They keep me updated when they can send someone over on the same day. Pedro came and fixed the blockage in no time with no mess. He is professional, kind and considerate. I'd rate their service 6 stars if it exists."

"Topic is a home water supply Shallow Well which operates with a shallow well jet pump + pressure tank installed in the basement. I had been collecting parts over the summer, as I knew the original to house jet pump would go out soon some day and with covid parts are hard to get quick, so started collecting ahead of time. Glad I did as the pump started leaking, from the housing. Replacement needed. Not an emergency but time to get it replaced. Was a ticking clock as it also looked like the pump was twisting putting stress on piping as original owner did not mount it and other fittings had large amounts of corrosion on them. I supplied these parts for the job: new 1hp jet pump, 44 Gal. pressure tank with T package, water filter housing, brass fittings, brass check valve, brass ball valves, 1" copper pipe and some copper fitting, and 2x10 pressure treated board to mount the pump/board to the floor with concrete anchors. Called up Sila on 10/14, master plumber Dave was available on 10/16 to come quote the job of installing what I supplied and misc. parts still needed. Talked with me and received my requests for specific design wants and he supplied his opinions & additional ideas and other options like wall mounting of water filter, sensor shutoff option and different water filter all together and we worked out the plan, did not do the different filter or sensor though. Talked about brass pipe and fittings at the pump up to the pressure tank and we agreed what I had purchased was good and would last a lifetime, vs copper all the way which would still last a long time. Quoted $2800 with water filter bypassing and $2600 without the water filter bypassing. Job was scheduled for 10/22. Quote was high level line item as listed here. Came a bit late on 10/14, due to an emergency call, no big deal Dave called to let me know. Was on time for installation on 10/22, 7:30am. Two workers on Job (Dave + 1, sorry I’m horrible with names +1 was an electrician and was helping Dave) Job took ~ 8 hours to finish. What was not able to be completed: Was not able to replace old original check valve. Well started to suck air when old was started to be removed, confirming there is no foot valve on the line or a broken one, so old check valve was kept. Concern was not being able to recover from air going down the well pipe causing priming issues. At this point the job would require a well expert and was not able to be replaced by Sila. What part of job was mis-understood: Mounting of jet pump to board/floor. Ended up missing the concrete anchors to start and installing after the fact with a different method. Made it more difficult to mount the pump and did scratch the rust proof paint. But it got done. Nice and sturdy. What was complicated on the job: Something that should have not been an issue at all went wrong. I had purchased 1” brass unions. There were two unions installed. One was found to be causing leaks during the initial job installation. This caused extra rework during the initial job. After job completion and area dried with a fan, it was found that both unions were leaking. The original one that had issues in the initial job and the 2nd one. One is pre pump and one is post pump. Called Sila office on 10/23 and told them what was happening, Dave’s earliest availability to come back was was 10/26. He was on time on 10/26. Dave stated that 1 union was giving trouble and replaced it with one spare that I had also purchased. When looking at the 2nd union again he was not able to get it to seal and he made the call and changed the design to direct copper connection and no union, I did not object as at this point just wanted the job done. No More leaks on that location, but also no ability to easily break the connection for future maintenance. When left no leaks. However, after using water for a while the 1st union started leaking again. Texted Dave direct with a picture and said he could return on 10/28 and I requested him to bring a union from his supply. Arrived when he could with ~ 1hr notice and replaced the union with one of his. When looking closer at the issue unions that I had purchased it was found they were cracking. Summary: I’m a novice in pluming, reason for calling Sila. I wish Dave would have noticed the poor part / crack issue and replaced unions from his stock on day 1. I was trying to save time by collecting parts over time and ended up causing issues. Dave knew he was working with brass and seems like he did not have backup stock on site incase of issues. Wish he did as I’d have two unions… and he would not have had to come back twice to repair the leaks. The call was made to not use the brass ball valves I purchased so it was clear that my parts were recommended to use but not absolute. Overall Dave and team did a great job, it’s clean, organized, valves and drain spickets installed nice and logically, filter is at good height, job completed like I asked and planned with Dave, except for the above jet pump mounting, union issue and check valve replacement discussion above here. Dave and team was professional and focused to get the job done. Thanks Dave for your hard work. Reason for Rating: I am giving this job an A rating based on the end result, Sila stood by the workmanship and resolved the issues that arose. That is a sign of a great company. If I would not have supplied the couplers that issue would not have happened ultimately and the check valve & well priming issue was just out of reach and would have required a well specialist to complete. The pump mounting was probably just lost in the large amount of details we had discussed, again it is mounted sturdy."

"First off, the consult was great. I was able to add services to my initial request and received a deal doing so. I also added a second set of services later that month. Adam and Steve completed the work and were completely professional and super efficient. They answered my questions and made sure I understood the work being performed. They worked with my schedule and were fantastic. I had a gas hook-up for a change from electric stove to gas stove - they even took care of the permits and inspection. They removed an old water access point for the fridge's icemaker that was in an awkward spot. They also added a regulator for the water pressure and water filtration system. Fantastic work all around. Should we need any more plumbing/gas work, I would definitely hire them again."

"TPK LLC did an amazing job unclogging my kitchen drain. They were professional, quick, and got everything flowing perfectly again. Great communication, fair pricing, and excellent service. Highly recommend!"

Please call us at 6172564872 or email at [email protected] for a free quotation!\n\nWe take great pride in our experience, expertise, quality, and customer service that we provide to meet the consumer's needs. It is our mission to provide excellent workmanship and complete customer satisfaction, from the start to the completion of a project. In order to understand the needs and expectations of our customers, we take great care to work and communicate with every customer in a professional manner. Our reputation is based on service, safety, and quality, regardless of how large or small the job.

"They advice, and had all our questions answered on sensible and affordable options. Very knowledgeable, prompt, polite, efficient, and thorough team! We are happy with their waterproofing services in our basement (fast sump pump and a grate trench with a discharge line that goes 15 feet to the outside bubbler) as well as crawl space shield installed under our addition. It works well, and Pioneer checked a month later and a year after for inspection and cleaning. A+ work and workers."

"I recently had a brand new HVAC system installed for both heating and cooling, and I couldn’t be happier with the experience. The team at Comfort Professor was extremely professional from start to finish. They worked efficiently, paid attention to every detail, and left everything spotless when the job was done. The cleanup was perfect, which I really appreciated. Highly recommend them if you’re looking for quality work and a smooth, hassle-free installation!"