Best door pros near Jefferson, LA

Ideally, a gate should be able to swing both in and out. However, if it can only open in one direction, it is generally best for it to swing inward. This is often the safest option, especially for deck gates near steps, as you'll want the gate to swing away from the stairs. An inward swing also prevents the gate from opening into a public space, like a sidewalk, and can be more convenient when carrying heavy items like a wheelbarrow into a garden.

There are exceptions, however. The layout of your property may require a different approach. For example, if your property is on a slope, the gate may not be able to swing inward. You should also ensure the gate can open fully without colliding with any objects or blocking access to other areas. For a backyard garden gate where public access isn't a concern, the direction it swings is largely a matter of personal preference. Finally, always check your local building codes, as they may have specific requirements for which way a gate must swing.

Start by checking the top or side edge of the door. Look for a certification label or metal tag stamped with details like the fire rating and information on the manufacturer. Even if it’s painted over, the tag should still be visible. Next, look along the edges for slim intumescent strips. They’re designed to swell up and seal gaps when exposed to heat. Finally, check if the door closes itself. Most fire doors have a self-closing mechanism, like an overhead closer or spring hinges. If none of these are obvious, contact a fire safety professional to help verify your door. 

Many doorways feature two door jambs. These are installed on both sides of a doorway to prevent the door from swinging too far. Door jambs usually stop the door at 180 degrees when closed.  A doorway floor transition sits between the door jambs on the floor, helping to create a safer and more aesthetically pleasing transition from one flooring type to the next. 

Many doors can be cut to size, but it depends on the door material. Solid wood doors are relatively easy to trim to a specific size, while hollow core and metal doors are trickier and can usually only be shaved down a little before you risk damaging them. If your door needs a lot of adjustment, it's best to order a custom size or have a pro do the resizing to make sure it holds up over time.