Get matched with top door pros in Chalmette, LA

Interior door thresholds are usually attached using finish nails, and some contractors will also use construction adhesive under the threshold to hold it in place. Exterior door thresholds are more commonly screwed to prevent them from pulling up when people step on the raised edge on the outside of the door. Exterior doors also include caulk sealant on the inside to prevent water and air from seeping through.

WD-40 can be used on squeaky door hinges, but it is generally considered a temporary, short-term solution rather than a long-term fix. While it can silence a squeak in a pinch by breaking down rust and grime, it is not a true lubricant, as it contains only a small amount of lubricating oil that evaporates quickly. Using WD-40 alone may lead to the squeak returning and can attract dirt and dust, potentially causing more wear on the hinge over time. For a more effective and lasting solution, it is recommended to first use WD-40 to clean the hinge, then wipe it clean. Afterward, apply a dedicated lubricant such as silicone spray, white lithium grease, a metal or plastic lubricant, or an oil-based product like petroleum jelly.

A slab door is a standalone door without a frame or hardware. A prehung door is a complete set that includes the door, frame, hinges, and sometimes the doorknob and lockset.

In most cases, a prehung door is the better and easier option to install, especially for DIY projects or exterior applications, as they often come pre-weatherproofed. They require fewer tools and less experience to install properly. Although prehung doors are heavier and have a higher upfront cost, the investment is often worthwhile for a complete upgrade that includes a new frame.

A slab door may be a better choice if you are on a tight budget, have a custom-sized wall opening, or only need to replace the door while keeping the existing frame. While the initial cost is lower, you will need to purchase all the hardware separately and do more DIY work to hang it, which may not result in significant time or money savings.

You should prime interior doors before painting for the best results. If you do paint directly on the wood, you could see some of the grain patterns show through the paint, in which case you’d need to apply additional coats. Priming the surface before painting will reduce the number of coats and can better cover the grain pattern for a clean, finished look.