Get matched with top contractors in Buras, LA

Q: Do grab bars need to be installed in studs?

• <div><p>For maximum stability, install grab bars on wall studs, as this will adequately support the weight. However, if you don't have access to studs, you can get by with wall anchors. If opting for the latter, choose specialty hollow wall anchors. </p></div>

Q: What can I use to enclose a carport?

• <div><p>There are both temporary and permanent ways to enclose a carport. If you&rsquo;re looking to enclose your carport for the winter, a canvas enclosure could do the trick. It won&rsquo;t be as protective as a permanent structure, but it can offer some protection from elements like snow, rain, and wind. For a permanent enclosure, you can add extra walls, add a new vertical roof, or a lean-to addition on one side of the structure. </p></div>

Q: Is it better to frame with nails or screws?

• <div><p>When deciding whether to use nails or screws for framing, the specific needs of the project must be taken into account. Nails have long been the go-to option for framing due to their affordability, ease of installation, and ability to withstand shear forces. They are perfect for structural framing projects where fast assembly is essential. In contrast, screws offer exceptional holding power and are particularly useful in situations requiring increased strength and resistance to pull-out forces. For projects that prioritize accuracy and long-lasting quality, screws may be the preferred option, though nails remain a dependable and efficient choice.</p></div>

Q: Is it okay to drill into a load-bearing beam?

• <div><p>You should avoid drilling or cutting into load-bearing beams because removing material will weaken it and increase the risk of structural damage or even collapse. If you do need to drill into a load-bearing beam, speak with a structural engineer first to discuss where it&rsquo;s safest to drill and the width and depth of the bit that&rsquo;s safe to use.</p></div>

Q: Do I need a permit to install a window seat?

• <div><p>You may need a permit to install your window seat. Even though it's an indoor modification, some municipalities require permits for any built-ins added to homes. Check with your carpenter or, if you're DIY-ing, do some research on your city's requirements.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your contractor service project in Buras, LA?

Select your specific project to find the pro for you.

Verified Reviews for Contractor Service pros in Buras, LA

*The Angi rating for Contractor Service companies in Buras, LA is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Contractor Service needs.

*The HomeAdvisor rating for Contractor Service companies in Buras, LA is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Contractor Service needs.

Last update on April 03, 2025

Reviewed in April 2025
James was very attentive and professional. He did what he said he would do. And very helpful to educate me on electrical requirements. I would most definitely recommend him and hire in the future.
JCV Electric & AC
Request a quote
Reviewed in August 2024
Excelente trabajo y cumplen en los tiempos acordados
4A Drywall
Request a quote
Reviewed in August 2023
Garcia did a great job and they were pretty quick. We’re very pleased with the overall experience.
Garcia Roofing LLC
Request a quote
Reviewed in June 2023
The job was good. They did a good job and clean it up after all.
Louisiana Turf Pros
Request a quote
Reviewed in March 2023
Did an awesome job! Was on time, reasonable, and very professional. Would definitely use them again.
Easy Rental, LLC
Request a quote
Reviewed in March 2022
Very professional, on time. I thought his appraisal was low and he under valued my home. I understand the market in my area is low but a house compared to mobile home should have more value.
Appraisers Now, Inc.
Request a quote
Reviewed in December 2021
Very accurate, very helpful, and very understanding I highly recommend them
Ginnis Contracting Inc.
Request a quote
Reviewed in May 2014
Had bad engine. Clay worked with me all the way through. Let me know everything. I was never in the dark about anything.
Tex-On Motor Center
Request a quote
Reviewed in July 2013
The home was setup perfectly. This company is highly recommended. Thumbs up all the way. Their the perfect company to hire to move your home. <br />
J&J Mobile Home Transporter
Request a quote

Find Contractors in Buras

Copper Roofing, LLC

4.7(

)

Serving Buras, LA and surrounding areas

Free estimates

Emergency services offered

Credit card accepted

"i am a tenant and my landlord just had a new roof put on my rental house. These roofers were super fast, completing the work in one day. They also did the best clean-up job! This is rare with contractors. Because I had to deal with a city inspector regarding smoke detectors, he even came inside and helped me install mine properly. What great service, and what a great business."

+21

Recommended by97%of homeowners

Request Quote

Reform Construction & Development

4.9(

)

Serving Buras, LA and surrounding areas

In business since 2018

Free estimates

Emergency services offered

"They did an awesome job and were polite young men. I would definitely hire them again and I would recommend them."

+29

Recommended by100%of homeowners

Serving Buras, LA and surrounding areas

In business since 2006

Credit card accepted

"I never contacted the provider or used this service in anyway. I have to
write this review so that the request to write this review stops
popping up.
The rating is bogus as it is required to be able to submit.
"

California Client Saves with HMD Designer Discounts

Recommended by54%of homeowners

Request Quote

Jill Seidner Interior Design

3.5(

)

Serving Buras, LA and surrounding areas

In business since 2006

Credit card accepted

"They did a good job. She had to submit like a photo but my daughter had them work on the central are of the loft. The deal was for one room. She got a lot of good ideal from her and it was worth it for her. They were professional and I did not hear anything negative."

Recommended by55%of homeowners

Request Quote

ALLSTATE Window & Siding Co.

4.2(

)

Serving Buras, LA and surrounding areas

In business since 1982

Free estimates

Emergency services offered

"Work was done on schedule. The salesman was not pushy. Down to earth. The guy who took the measurements very knowledgeable and polite. The 2 installers did a really good job. They were very Respectful and followed my requests. They cleaned up fairly good. My Windows look good and all work properly. One complaint is that no one from the company followed up after installation."

Recommended by84%of homeowners

Request Quote

Carpenter's Complete Inc

3.1(

)

Serving Buras, LA and surrounding areas

In business since 1996

Emergency services offered

Credit card accepted

"Carpenters Complete Inc installed a new bathroom in my home at a great cost. Matt (owner) quickly responded to my estimate inquiries and was prompt to come out and give a free estimate. He had alot of ideas that were inexpensive and was wonderful to work with. Matt was available to answer any questions or concerns i had throughout the whole process. He was patient and personable and i loved my experience with this company. He also gave me a great deal on storm shutters as he installs those as well."

Recommended by71%of homeowners

Serving Buras, LA and surrounding areas

In business since 2010

Free estimates

Emergency services offered

"Other than a late start the team was focused and knowledgeable. They took great care to cleanly remove the damaged flooring and professionally install the replacement. It should be notes that the old flooring was incorrectly glued, making the task very tedious and difficult. The result is that you can't tell where the repair is without knowing its location. Well done."

Recommended by100%of homeowners

Request Quote

Edgewater Builders, LLC

5.0(

)

Serving Buras, LA and surrounding areas

In business since 2009

Free estimates

Credit card accepted

"The work he did was very professional and communicated well."

Response time4 hrs

Response rate100%

Recommended by100%of homeowners

Serving Buras, LA and surrounding areas

In business since 2021

Free estimates

Emergency services offered

"Duvon Renovation is FIRST CLASS!!!! These people do exactly what they promise and the price is very reasonable. They will get all of my work and I HIGHLY RECOMMEND THEM!!!!"

+78

Recommended by100%of homeowners

Request Quote

Hampton Enterprise LLC

3.7(

)

Serving Buras, LA and surrounding areas

In business since 1989

Free estimates

Emergency services offered

"They did a very good job. They were quick and I am very happy with the work that they did for me."

Recommended by60%of homeowners

Request Quote

Showing 1-10 of 32

Unfinished Carpentry questions, answered by experts

For maximum stability, install grab bars on wall studs, as this will adequately support the weight. However, if you don't have access to studs, you can get by with wall anchors. If opting for the latter, choose specialty hollow wall anchors.

There are both temporary and permanent ways to enclose a carport. If you’re looking to enclose your carport for the winter, a canvas enclosure could do the trick. It won’t be as protective as a permanent structure, but it can offer some protection from elements like snow, rain, and wind. For a permanent enclosure, you can add extra walls, add a new vertical roof, or a lean-to addition on one side of the structure.

When deciding whether to use nails or screws for framing, the specific needs of the project must be taken into account. Nails have long been the go-to option for framing due to their affordability, ease of installation, and ability to withstand shear forces. They are perfect for structural framing projects where fast assembly is essential. In contrast, screws offer exceptional holding power and are particularly useful in situations requiring increased strength and resistance to pull-out forces. For projects that prioritize accuracy and long-lasting quality, screws may be the preferred option, though nails remain a dependable and efficient choice.

You should avoid drilling or cutting into load-bearing beams because removing material will weaken it and increase the risk of structural damage or even collapse. If you do need to drill into a load-bearing beam, speak with a structural engineer first to discuss where it’s safest to drill and the width and depth of the bit that’s safe to use.

You may need a permit to install your window seat. Even though it's an indoor modification, some municipalities require permits for any built-ins added to homes. Check with your carpenter or, if you're DIY-ing, do some research on your city's requirements.

The Buras, LA homeowners’ guide to contractor services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Kate Fann
•
May 30, 2026May 30, 2026
How Much Does It Cost to Install Shiplap? [2026 Data]
The cost to install shiplap siding or wall surfaces in your home depends on several factors, including the material type and the size of your project.
Angi
•
Mar 18, 2026Mar 18, 2026
How Much Do Carpenters Charge Per Hour? [2026 Data]
Find out how much carpenters charge, including average rates, cost factors, and tips to help you budget for your next carpentry project.
Dan Simms
•
May 30, 2026May 30, 2026
How Much Does It Cost to Install an Outlet in an Unfinished Basement? [2026 Data]
Need to run electricity to your basement? Learn about the cost to install an outlet in an unfinished basement and what factors affect your project cost.
Matt Marandola
•
May 22, 2026May 22, 2026
How to Hire a Qualified Pro for House Framing
House framing is one of the first parts of building a home. To do this, you’ll want to hire a rough or unfinished carpenter. Using this guide, you’ll know what questions to ask and where to look for your house framing contractor.
C.E. Larusso
•
May 21, 2026May 21, 2026
8 Stylish Ways to Remodel Your Unfinished Basement
An unfinished basement is often the final frontier of home design. While the uses of other rooms are often preordained, the basement can be so many different things, from a playroom to a home office to a bar.
Scott Dylan Westerlund
•
May 22, 2026May 22, 2026
18 Essential Deck Terms to Know When Working on Your Staining Project
It's important to know the right terminology when taking on the task of staining your deck. Take a look at the deck maintenance terms every homeowner should know.