Top-rated electricians.

Get matched with top electricians in Pippa Passes, KY

Enter your zip and get matched with up to 5 pros

Need a pro for your electrical service project in Pippa Passes, KY?

Select your specific project to find the pro for you.

Find Electricians in Pippa Passes

Avatar for W B Lightning Rods
W B Lightning Rods
4.6(
372
)
Lightning Protection - Install or Repair

Serving Pippa Passes, KY and surrounding areas

Approved

In business since 2001

Free estimates

Warranties offered

"Used this company previously and again it was a pleasure from beginning to end. I would give him 10 Stars if I could. Referred William to a close friend of mine and she was just as pleased. We both sleep better during our bad Florida thunderstorms. A friend of mine lost their home due to lightning. They got out just in time couldn’t save anything but their lives barely. I urge all to install lightning rods."
lightning protection
 Residential LPS
lightning protection
 Residential LPS
lightning protection

+79

Response time1 day
166 neighbors recently requested a quote
Recommended by96%of homeowners
Avatar for Williamson Appliance Repair
Williamson Appliance Repair
New to Angi
Appliance (Major Electric Appliance) - Install or Replace

Serving Pippa Passes, KY and surrounding areas

Approved

I own a appliance repair company that performs commercial and residential appliance repair that specializes in refrigeration walk-in coolers/freezers repeatable ice machines reach in coolers etc but also kitchen equipment dryer vent cleanings vent hood cleanings

Cooler repair
Cooler repair
Showing 1-10 of 47
Electrical questions, answered by experts

Heated floors use less electricity than traditional heating systems. The average electric bill for running radiant floor heating nonstop is around $3 per day. For example, a 1,500-watt electric space heater costs around $4.80 per day, a 27,000-BTU electric boiler costs around $6.25 per day, and a 100,000-BTU electric heater costs $46 per day.

It’s possible to distinguish a positive black wire from a negative black wire if you know what type of circuit the wires are in. If it’s an alternating current (AC), then black wires are positive. If it’s a direct current (DC), then black wires are negative. 

Sometimes, a circuit has two black wires. In that case, the positive black wire will be solid black while the negative black wire will have a white stripe on it. If you’re still unsure, you can use a multimeter to check.

Your outlet should be a ground-fault circuit interrupter (GFCI). These outlets will cut power off in the case of an electrical fire, keeping your home and family safe. Extension cords can also be GFCIs. A local electrician can replace older outlets with GFCIs, if necessary.

A C-wire is typically blue, but don’t rely on colors to find which wire is which when it comes to thermostat wires. The C-wire may also be black, brown, or purple. Instead, if you’re looking for the C-wire, look at the thermostat panel for a wire connecting to “terminal C,” or call in a pro to help you look for a C-wire.

To prevent a plug from overheating, always ensure that the electrical load connected to the plug does not exceed the plug's capacity. If the plug feels hot to the touch or emits a burning smell, immediately shut off the circuit breaker and unplug all devices from the hot outlet. Prevent electrical fires by avoiding using extension cords or adapters with the plug, as they can cause it to overheat due to increased resistance. Additionally, ensure that the plug is properly inserted into the outlet and that the outlet is not damaged or loose. 

The Pippa Passes, KY homeowners’ guide to electrical services

From average costs to expert advice, get all the answers you need to get your job done.