Get matched with top electricians in Mcdowell, KY

If your breaker box won’t reset, stay on, trips when overloaded, or gets seriously damaged, you will need to replace the breakers or possibly the entire panel. A damaged breaker can lead to a fire, so it’s best to err on the safe side and look into replacement. Hire a professional electrician to replace a breaker box to ensure your personal and property safety.

When wiring a switch, the power typically comes into the receptacle first. The neutral wire goes straight to the outlet, while the hot wire is split. You'll need a wire nut to splice the hot wire back to one of the receptacles, but you will also tie another wire into that same wire nut and run to the switch. That way, you can control the flow of electricity to that particular receptacle by turning the switch on and off.

If you have a garage heater that is 1,500 watts or more, it will need its own breaker. As a good rule of thumb, no appliance should exceed 1,500 watts per outlet for best outcomes. Consult a local garage heating service to determine the power needs for your outdoor or indoor space.

To install an outlet from existing wiring, you’ll need to choose a location where you can already access existing wiring. The easiest way to do this is to install an outlet on the other side of the wall of an existing outlet. 

Since the wiring is already in place, all you have to do is connect a new cable to the existing wiring and then connect the correct wires through the wall—to the new electrical outlet. Place your new outlet into the opening in the wall and then connect the correct wires to the appropriate terminal screws.