Best dishwasher installation pros near Edgewood, KY

Several signs can tip you off to a clogged dishwasher drain. At first, you may notice that it’s taking longer than usual for the dishwasher to drain, or you may hear gurgling sounds during the draining part of the cycle. You might also notice water backing up into your sink or excess food at the bottom of the dishwasher after a load. The most obvious sign, though, is seeing standing water at the bottom of your dishwasher after the cycle has finished.

To create a siphon break and remove any chance of dirty sink water or water that backs up into the sink from getting into your dishwasher, your dishwasher drain hose needs to have a high loop or an air gap device as part of its installation. All building codes require at least a high loop. In many places, it’s necessary to install an air gap device to meet the code.

Local plumbing codes and manufacturer recommendations typically dictate the minimum distance between a sink and a dishwasher. This is generally 18 to 24 inches, providing enough room for easy loading and unloading of dishes without hindering the sink's function. Maintaining this separation not only adds convenience but also reduces the chances of water damage and optimizes plumbing connections.

The cost to repair a dishwasher is $200 on average, with the typical price ranging from $160 to $300. However, if you need a more specialized repair, that total could reach $600. The main cost factor is the price of the replacement part, but the dishwasher’s make, model, and year can also impact the price. 

For a simple repair, such as a filter replacement, you can comfortably budget to spend between $50 to $100. But for something more complex like a repair on the dishwasher’s motor, you might see a bill totaling $400 to $600.