Best roofers near Saint Paul, KS

Some people prefer to use connectors consisting of galvanized metal to replace the birdsmouth cuts on the rafter board. Common names for these metal pieces include hurricane ties and variable-pitch connectors. Making birdsmouth cuts is more cost-effective than purchasing these connectors for each rafter. However, because making large birdsmouth cuts to accommodate extra-wide exterior walls can weaken the rafter, a connector may be the better option in some cases.

Just like when you’re shingling a roof, you can install felt underlayment under a metal roof, but a synthetic underlayment like adhered ice and water shield is the best option. These use adhesives rather than mechanical fasteners, so you have fewer penetrations going through your roof deck and a lower risk of leaks. Ice and water shield is also easier to install because you don’t need additional tools or fasteners to attach it to the roof deck.

Re-roofing is the process of placing a layer of shingles over top of existing shingles, rather than pulling out those shingles and replacing them. Compared to a full roof replacement, re-roofing typically costs less and requires less labor and time. It's not an option for everyone, though. You may need a full roof replacement if your roof already has more than one layer of shingles. A full replacement may also be necessary if your roof has extensive damage.

EPDM roofs have a few common problems, most of which can be resolved with regular maintenance. This type of roofing is laid down in sheets with seams, which can be a starting point for leaks. Proper installation and roof sealing can often avoid seam issues. 

The material is also susceptible to tears and punctures from falling branches or other sharp objects. There are black and white versions of EPDM, and the black version is more prone to fade and succumb to UV damage. Regular roof inspections can protect the costs of rubber roof installation and extend the life of your roof.