Get matched with top roofers in Altamont, KS

Skipping the installation of a drip edge or gutter apron can lead to significant water damage. Without this component, water is more likely to seep under roofing materials or leak behind gutters, damaging the fascia, soffits, siding, and even the interior of your home, such as the attic. Over time, this moisture can cause rot, mold, and deterioration. In colder climates, a missing drip edge also increases the risk of ice dams, which can lead to expensive repairs. A drip edge is an essential part of a roof's drainage system, and some local building codes may even require its installation to protect the home from water damage.

Whether a metal or shingle roof is better for you depends on your preferences. Standing seam metal roofs require little to no maintenance, but if you install a screw-down metal roof where the fasteners are exposed, the gaskets on the fasteners will dry rot and need to be replaced. Generally, screw-down metal roofs need to be re-screwed every 15 to 20 years.

Metal roofs are energy-efficient and have extended warranties, while asphalt shingles are less durable than most. They tend to lose color and get damaged over time, and absorb heat from the sun.

As with any roofing material, there are benefits and drawbacks to consider before installing roll roofing. On the plus side, roll roofing is budget-friendly, lightweight, and comparatively easy to install. It is also ideal for low-sloped roofs and lasts around 10 years. The cons of roll roofing, however, include its low durability compared to roofing materials, restricted color choices, and low ROI.

Pros:

• Low-cost

• Lightweight

• Cut to size

• Easy and quick installation 

• Designed for low-sloped roofs

• Waterproofs your roof for an average of 10 years

• Easy to purchase and transport

Cons:

• Less durable than asphalt shingles

• More prone to cracks and tears

• Short life span

• Not as many color or style choices

• Not as aesthetically pleasing as shingles, wood, or clay tiles

• Not preferred for a higher home resale value

There should be small gaps between your roof and the walls of your home, and other buildings. These small gaps let building materials shift, expand, and contract with weather and other outside forces, and they prevent moisture from wicking down walls from roofing and gutter systems. Without these strategic gaps, your home’s exterior and its finishes can sustain water damage, decay, peel, delaminate, and crack. However, there is a fine line between a smart gap and a problematic gap—all  gaps should be small, intentional, and covered or filled in with foam insulation to prevent pests from using them as access points.