Get matched with top plumbers in Bremen, IN

Building codes don’t allow homeowners or businesses to run sewer pipes and water lines in the same trench for safety and environmental purposes. If the sewer line started leaking, it would risk contaminating the water supply to your house, which threatens the health of you and your family. These lines need to be in separate trenches and may need to be separated both horizontally by around 5 to 10 or more feet and vertically by 12 to 18 or more inches.

No, a larger well pressure tank will not increase your home's water pressure by itself. Water pressure is determined by the pressure control switch on the well pump.

However, a larger tank does offer other benefits. It can store more water, which allows you to run water for longer periods before the pump needs to turn on. This reduces how often the pump cycles on and off, leading to less wear and tear on the pump and the entire well system. Consequently, a larger tank can help extend the life of your equipment and may prevent future pump issues that could affect water pressure.

If your goal is to increase water pressure, consider these alternatives:

• Adjust the pressure settings on your tank to a higher PSI (pounds per square inch).

• Replace your current pump with a model that has a higher flow rate, measured in gallons per minute (GPM).

• Have a professional install a water pressure booster pump in your plumbing system.

• If you experience pressure fluctuations, consider upgrading to a constant pressure system.

National emergency plumbers usually have greater availability to address emergencies because they have more professionals at their disposal, but local plumbers may be located closer to your home and can arrive faster. We recommend contacting one or two local plumbers first to see how quickly they can arrive. Move ahead with the service if it’s within a reasonable time frame. If not, contact a national company to see if they can get out more quickly. National companies sometimes outsource work to third parties, which can often mean faster response times.

To check the water pressure in your house, you’ll need to use a water pressure gauge, which you can purchase at your local hardware store. Locate your outside water spigot and attach the gauge (following the manufacturer’s instructions). Normal home water pressure is between 40 and 80 PSI.