Get matched with top roofers in Scott Air Force Base, IL

Roof underlayment usually lasts as long as the roofing material that covers it, as it’s not directly exposed to the elements. In most cases, roofing companies will replace the underlayment each time they install a new roof. In some cases, particularly with slate, clay, or certain metal roofs that can last 50 to 100 years, your underlayment may require replacement within that timeframe, especially if you start to notice roof leaks.

Skipping the installation of a drip edge or gutter apron can lead to significant water damage. Without this component, water is more likely to seep under roofing materials or leak behind gutters, damaging the fascia, soffits, siding, and even the interior of your home, such as the attic. Over time, this moisture can cause rot, mold, and deterioration. In colder climates, a missing drip edge also increases the risk of ice dams, which can lead to expensive repairs. A drip edge is an essential part of a roof's drainage system, and some local building codes may even require its installation to protect the home from water damage.

You cannot replace granules that have been lost off shingles. The granule embedding process is part of shingle manufacturing, and once the bond holding the granules to the shingles has been lost, the granules are gone for good. Shingles with granule loss must be fully replaced to continue offering adequate protection.

Furring strips (also called wood stripping) are not always necessary for a metal roof installation, but they are highly recommended and may be required by local building codes or the roofing manufacturer's specifications. There are several key reasons to use them:

• Energy Efficiency: Furring strips, made of wood or metal, create an air gap between the metal panels and the roof deck. This acts as a thermal break, reducing heat transfer into your home and improving overall energy efficiency.

• Moisture and Condensation Control: The air gap allows for better airflow, which helps prevent moisture buildup and condensation under the metal panels.

• Structural Support: They provide a solid, even frame to which you can attach the metal roofing panels.

It is especially important to use furring strips when installing a metal roof over existing shingles. Without them, the roof surface can be uneven, and you will experience greater solar heat gain.