Top-rated masons.

Get matched with top masons in Lewiston, ID

Enter your zip and get matched with up to 5 pros

Need a pro for your masonry work project in Lewiston, ID?

Select your specific project to find the pro for you.

Find Masons in Lewiston

Avatar for MTU Services LLC
MTU Services LLC
5.0(
5
)
Concrete Foundation - RepairConcrete Foundation - RaiseFoundation Drainage - Install or Replace+3 more

Serving Lewiston, ID and surrounding areas

Approved

In business since 2021

Free estimates

Emergency services offered

"We’ve had a lot of crews in our home for various projects over the years, and I have to say this was one of the most courteous. They worked hard, navigating through our kitchen to access the basement and I really appreciated their efforts. Thank you MTU, we now have safe walls in our cellar and fresh beams to keep the house standing ;)"
Elevator pit waterproofing and sealing
Piers under an existing home
Piers under an existing homes middle wall
Solutions/Answers
Response time1 day
Response rate100%
13 neighbors recently requested a quote
DaBella - Spokane (Siding)
3.7(
754
)
Brick or Stone Siding: Install or Completely Replace

Serving Lewiston, ID and surrounding areas

Approved (Corporate)

In business since 2011

Free estimates

Credit card accepted

"After a little glitch, my husband called Dabella and Dustin reached out to us, he went above and beyond to help us get a new roof. He was professional and kind helped us get the best financing and got our roof installed before the snow started flying. We had a new roof and gutters installed. Everything looks awesome. Thank you Dustin"
10 neighbors recently requested a quote
Recommended by88%of homeowners
Avatar for MTU Services, LLC
MTU Services, LLC
4.8(
21
)
Basement Drainage Channels - InstallBasement Drainage Channels - RepairConcrete Foundation - Raise+3 more

Serving Lewiston, ID and surrounding areas

In business since 2020

Free estimates

Warranties offered

"Great customer service! Marc and MTU was flexible and addressed my foundation repair quickly under short notice. The work crew was very professional and did outstanding work and all on time with the estimate. Would hire again for future projects."
Response time10 hrs
Response rate91%
Recommended by94%of homeowners
Showing 1-10 of 30
Masonry questions, answered by experts

Initially, brick staining is not cheaper than painting. However, while it has a higher up-front cost, it may be more cost-effective in the long run. Brick stain can last for 20 years or longer, compared to paint, which usually starts to peel away in three to five years.

If your old bricks are in decent condition and you have the space to store them where they’ll be protected from the elements, keeping old bricks is often worthwhile. You’d spend anywhere from $70 to a few hundred dollars to have them removed from your property, in which case you won’t be able to use them for future projects. Holding on to old bricks in good condition means you can use them later for other DIY projects, potentially saving yourself some money on disposal and new materials down the road.

For most brick cleaning jobs, including fireplace bricks, use a masonry sponge and a gentle cleaner. A simple solution of equal parts water and vinegar, or a few drops of dish soap in a bowl of water, can effectively remove grime. For tougher stains, you can use a dedicated masonry or fireplace cleaner. It is crucial to wet the bricks thoroughly with water before applying any cleaning solution to prevent the brick from absorbing it, and to rinse the surface completely afterward. Harsher cleaners containing bleach or ammonia should only be used as a last resort, and they should never be mixed together.

You should generally drill into the mortar joints when installing shutters on brick. Mortar is softer, which makes drilling easier and puts less strain on your tools. It also lowers the risk of cracking a brick—something that’s a lot harder to fix. Mortar holds fasteners well enough for standard shutters, and if you ever need to patch the holes later, it’s a much simpler job than dealing with damaged brick. Just keep in mind that if your mortar joints are too thin or the hardware calls for brick anchoring, you'll need to check the manufacturer’s recommendations and adjust accordingly.

Drilling into brick doesn’t have to be a dangerous project if you prep and approach it with the right tools and techniques, but it does come with risks if it’s not done correctly. It can lead to significant issues, such as damaging the brick or affecting the wall’s structural integrity. Applying too much force can crack or chip the brick, while incorrect placement might compromise its load-bearing strength. 

The Lewiston, ID homeowners’ guide to masonry services

From average costs to expert advice, get all the answers you need to get your job done.