Get matched with top masons in Nezperce, ID

Brick spalling—which refers to the crumbly, flaky, or pitted appearance that can develop over time—is caused by a few different conditions. These include:

• Climates with constant freeze-thaw cycles

• Use of non-breathable sealants

• High-pressure water cleaning

• Improper installation

While you can’t do anything about the weather, you can preserve your bricks by cleaning them with soapy water and a good old-fashioned scrubbing. Pressure washers may be satisfying to use, but they can eventually wear away the surface of your bricks. If you don’t have advanced-level DIY skills in masonry, you can hire a reputable masonry contractor in your area for your project.

Brick can increase the value of your home depending on the type of masonry materials used. Homes generally have a higher resale value when they have brick siding, and brick is also easier to maintain (and lasts longer) than other types of siding, which can motivate buyers to make an offer.

Just keep in mind, however, that although brick can up the asking price when you sell your house, the cost to brick a house is also more expensive than other typical siding costs—so you’ll invest more in the project.

Yes, brick can breathe through limewash. Limewash is a breathable coating made from natural lime and water, allowing moisture to pass through while providing a protective layer. Unlike synthetic paints or sealants, which can trap moisture within the brick and lead to issues like mold, limewash allows the brick to maintain its natural breathability. This characteristic makes limewash an ideal choice for historic structures where preserving the integrity of the brick is essential.

You should generally drill into the mortar joints when installing shutters on brick. Mortar is softer, which makes drilling easier and puts less strain on your tools. It also lowers the risk of cracking a brick—something that’s a lot harder to fix. Mortar holds fasteners well enough for standard shutters, and if you ever need to patch the holes later, it’s a much simpler job than dealing with damaged brick. Just keep in mind that if your mortar joints are too thin or the hardware calls for brick anchoring, you'll need to check the manufacturer’s recommendations and adjust accordingly.