"Needed to have a water softener loop and drain installed with associated replumbing of outside faucets and kitchen main (these have to remain "hard"). Very fast and professional. Great price"
"Magic Electric, Plumbing & Heating/Air... I have purchased a 102 yr older home in Hagerman, ID. MAGIC: Tucker, Cleaned, Tuned my furnace ASAP. Angel and Adam worked diligently for 2 weeks, plaster/lathe, to rewire my home and shop to code electrically and also functionally for my needs. The also installed exterior security lights. Arron and Cody worked hard and long, in my 1.5 ft. crawl space to upgrade my plumbing Drainage, sinks and commode were reset, outdoor spigots repiped. Installed 2 hot water heaters and a water softener. WOW!!!! I truly, respectfully APPRECIATE each and EVERY ONE of these Professionals who have worked pleasantly through this process. THANK YOU, MAGIC MEN! You all deserve a round to applause and my Gratitude. BRAVO!"
"Jim is local. It went great. Jim Ferrell is a professional of the highest caliber. Responded quickly, took care of my problems, and advised me as to better means of protection than I had. He came back a second time to uninstall software that I purchased that did not provide adequate protections and installed free software that would do the job. He did the work through remote connection, but is available on site if necessary. For those people needing help on getting red of malware, viruses , etc. on your computer, Jim is local, better than all thse remote out of state location providers, is a mature, highly trained professional in this area. If you go to local computer stores you get very young people that can do a basic job, but are no where near the professional level of Jim. I highly recommend Jim to anyone that needs these type services. "
"When he tested the dryer, a leak in the valve at the propane tank was discovered. Jason explained the dangers of propane and advised us to fix the problem before we used the dryer. He worked with us on the price and payment arrangements. He seems to be very concerned with the quality of his work and the satisfaction of his customers. I would recommend him to anyone! "
"Well, the first time the replacement was ordered it was the wrong one, which of course, delayed the installation a week. When it was finally installed I had to pay an additional $850 for code upgrades. This I was not informed of by Home Shield. Then we noticed that there was water on the garage floor and found that the pipe coming in from the wall was leaking at the wall so had to call the plumbing company back out to fix it. They first tried to say it was not their fault but since there wasn't a leak before they installed they did fix it. I have used Home Shield a few times before and never had a problem. Some of the companies they use are not the best so you have to research them before you commit. I have found HS service to be good if you do your homework. At the end of the day I was without hot water for almost 3 weeks but it was do to the plumbing company they sent out."
An expansion tank must always be installed on the supply side, which is the side where the boiler sends water out to heat the systems. That placement allows the water to push against the air and condense properly as it is heated, then circulated through the system. Professional installers can recommend the best place on the supply side for an expansion tank.
Common problems include leaks, low pressure, and inefficient heating. Regular maintenance prevents many issues.
Costs depend on unit size, labor, fuel type, and whether additional piping or venting is needed.
A common HVAC rule is that for every 500 to 600 square feet of living space, you need 1 ton of heating or cooling capacity. Now that you know this common rule, you also need to know that it isn’t very accurate, and a dedicated pro wouldn’t use it for your home. If you talk to a pro who won’t or can’t perform a proper Manual J calculation, consider hiring someone more thorough.
Most home boilers will need an expansion tank. That’s because these boilers are closed-loop systems, where the water is trapped. An expansion tank is needed when the boiler heats the water and it expands, allowing air to condense in the tank to make room for the water. Other types of boilers don’t use an expansion tank, such as traditional steam boilers, but these aren’t as common. And hot water tanks may be able to use a pressure release valve instead. When in doubt, call in a pro to take a look.
The Gooding, ID homeowners’ guide to boiler installation services
From average costs to expert advice, get all the answers you need to get your job done.
Discover the average electric boiler installation cost, key price factors, and ways to save. Get transparent, expert-backed estimates for your project.
