Top-rated drywall pros.

Get matched with top drywall pros in Downey, ID

Enter your zip and get matched with up to 5 pros

Need a pro for your drywall service project in Downey, ID?

Select your specific project to find the pro for you.

Find Drywall pros in Downey

Avatar for Chaud Company Plumbing Services LLC
Chaud Company Plumbing Services LLC
4.7(
28
)

Serving Downey, ID and surrounding areas

In business since 1986

Credit card accepted

"

the leak was a drip at an elbow on the softener cold water feed. it had dripped a long time as it didn't show until the sheetrock was

saturated and mold started. I opened the ceiling and the wall and located how for it had run giving me a good look at the zigzag

placement of the water line when the softener was installed. The provider readily agreed to clean that up with the cost of a foot or two of pipe. I am completely happy
"
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Recommended by96%of homeowners
Artisan Drywall & Tradesman LLC
4.8(
3
)

Serving Downey, ID and surrounding areas

In business since 2017

Free estimates

Credit card accepted

We take great pride in our experience, expertise, quality, and the level of customer service that we provide. It is our mission to provide excellent workmanship and complete customer satisfaction from start to completion of a project. We take great care to work and communicate with every customer in a professional manner. Our reputation is based on service, safety, and quality, regardless of how large or small the job.

Response time6 days
Recommended by100%of homeowners
Avatar for THE HOME REJUVENATOR LLC
THE HOME REJUVENATOR LLC
4.8(
5
)

Serving Downey, ID and surrounding areas

In business since 2008

Free estimates

Emergency services offered

"I hired the company to take down and haul away a shed. He was on time, hardworking and part mountain goat. He has amazing balance and ability to work in awkward corners"
Response time1 day
Recommended by100%of homeowners
Showing 1-10 of 38
Drywall questions, answered by experts

In framing, studs are placed at 16-inch intervals to coincide with the typical spacing of wall materials such as drywall or plywood. This spacing is called "on-center" and is necessary for maintaining structural stability and efficient use of materials. The 16-inch spacing also helps to distribute the weight evenly across the building's structure. For those looking to cut material costs and improve energy efficiency, 24-inch stud spacing can be employed through a method called "advanced framing". This requires careful planning and adherence to local building codes to ensure structural integrity.

To hide drywall edges, you need to properly apply drywall tape and multiple layers of joint compound. These materials hide the seams between drywall sheets and fill the holes from drywall screws, leaving behind a smooth, flat finish to paint over. Apply joint compound smoothly, and finish the job by sanding the walls to make sure you fully hide drywall edges and other imperfections.

The easiest way to cut holes in drywall for electrical boxes is to use a spiral saw with a drywall router bit. Hang the drywall without cutting out a hole for the box, but make sure you measure and mark where the box is located on the wall. Once you screw in the drywall sheet, drill a small hole into the box void, insert the spiral saw bit, and move it around the edge of the box using the inside wall as a guide. You can also use an oscillating multi-tool with an electrical box cutout for fast, professional results.

Mudding drywall is a DIY-friendly project, but patience and practice are required for perfection. If you’re working in a highly visible area and want the best possible finish, hiring a professional drywaller is worth the cost. Pros have the tools and know-how to ensure a smooth surface with fewer sanding sessions and less cleanup.

You should not leave drywall outside, especially overnight or in a wet, humid climate. Exposure to rain and humidity can damage the drywall, weakening its structural integrity and making it susceptible to mold growth. If you must leave drywall outside during a project, be sure to cover it with a tarp or keep it inside a storage shed to protect it. Even drywall intended for exterior projects requires a protective moisture barrier. For best results, store any extra drywall in a dry area away from the elements.

The Downey, ID homeowners’ guide to drywall services

From average costs to expert advice, get all the answers you need to get your job done.

What do you need done? We’ll find top pros.
  • 🌱 "Mow a small front yard"
  • 🛠 "Fix a leaking pipe under the sink"
  • 🏠 "Repair shingles on an asphalt roof"