Get matched with top glass and mirror pros in Kihei, HI

Black spots on the bottom or along the edge of your bathroom mirror are caused by oxidation behind the mirror glass. When moisture and air are trapped between the glass and the backing, they react and cause discoloration. This is sometimes referred to as “mirror rot.” You’ll need to separate the glass and the backing to fully remove it.

Using caulk is one of the simplest and most recommended methods to finish glass tile edges. It creates an elegant seam between the glass tile and the adjacent area, along with a waterproof seal. With this method, you want to use a caulk color that matches the grout and, along with the grout, compliments the tile. Make sure the caulk line is smooth and even. Alternatively, you can use a bullnose or tile trimming to edge, however, that will also require caulk to seal.

Shower doors can shatter on their own in rare cases. Glass shower doors are manufactured to high standards to ensure their durability. If you’d prefer a shower door that’s less likely to break, opt for laminated glass rather than tempered glass. If you have glass shower doors, inspect them regularly. Check that all the hardware is in good shape and the glass has no chips or cracks.

Bathroom mirrors weigh between 6 and 13 pounds, depending on the size. A 16x20-inch mirror weighs 6 pounds, while a 24x36-inch bathroom mirror weighs 12.5 pounds. Large mirrors, such as a 30x40-inch mirror, weigh 46 pounds. When installing or hanging a bathroom mirror, have a neighbor or partner assist you in lifting and holding the mirror in place. A second set of eyes can also help ensure the mirror is centered and level.