Top-rated deck maintenance specialists.

Get matched with top deck maintenance specialists in Crescent City, FL

Enter your zip and get matched with up to 5 pros

Need a pro for your deck maintenance project in Crescent City, FL?

Select your specific project to find the pro for you.

Find Deck maintenance specialists in Crescent City

Avatar for All Area Fence
All Area Fence
4.5(
24
)
Deck, Fence, Patio or Porch - Clean and SealDeck, Fence, Patio or Porch - Clean and Seal - For Business

Serving Crescent City, FL and surrounding areas

In business since 1983

Free estimates

Emergency services offered

"These guys seriously rock! They came out early, were very efficient, used quality materials, and built a gorgeous deck and fence! The were extremely careful about details and made sure the gate swung just as smooth as could be. Really solid, nice people who know their business well. Please see the attached photo of their beautiful work!"
Recommended by95%of homeowners
Avatar for Luke's Painting Company
Luke's Painting Company
4.4(
40
)
Deck, Fence, Patio or Porch - Clean and SealDeck, Fence, Patio or Porch - Clean and Seal - For Business

Serving Crescent City, FL and surrounding areas

In business since 2017

Free estimates

Credit card accepted

"Luke was a gift! He responded quickly to my call and was able to start painting two days later. He was professional, knowledgeable, on time and always cognizant of the fact that I was working from home while he was painting. He meticulously painted my entire house and it looks amazing. I highly recommend Luke, you will not be disappointed."
After.. what an amazing difference!
After picture of the beautiful entryway
after picture of the fence
after.. beautiful color!
Exterior Painting in Sellers, SC

+76

Recommended by93%of homeowners
Avatar for M.B. Finishes
M.B. Finishes
5.0(
5
)
Deck, Fence, Patio or Porch - Clean and SealDeck, Fence, Patio or Porch - Clean and Seal - For Business

Serving Crescent City, FL and surrounding areas

In business since 2005

Free estimates

"Excellent!! In my newly purchased home, I wanted the color in the master bedroom changed. The existing paint job was excellent - I just wanted a different color (from blue to gray). When I showed Matt my choices he made a suggestion (a warmer gray as opposed to a cooler gray for the bedroom). I am so glad I followed his advice. Matt arrived on time with all tools and materials. He removed wall plates and covered trim. He asked me to look after the first coat to make sure he was doing what I wanted. Then, when finished - it was so beautiful! The color turned out to be perfect and completely covered the old color. The job was spotless in that there were no skipped spaces and no disturbance to the already perfectly done trim and closet door (which were white). Matt is so professional and also so personable. He is a dream to work with!!
"
Additional Photos
Matt&April 2014
New white ceiling color and yellow on the walls, 2 coata. And 1 coat of oil primer
Old wall color and oil primer
Sanded, oil prime some bare wood spots, 2 coats of white exterior paint

+22

Recommended by100%of homeowners
...
Showing 1-10 of 57
Deck Maintenance questions, answered by experts

The best and fastest way to remove paint from a deck often involves combining a chemical stripper with a pressure washer. Gel-based paint strippers are highly recommended because their thick consistency makes them less messy and easier to apply than liquid strippers. After applying the stripper to loosen the paint, you can use a pressure washer to efficiently wash away the residue. When using a pressure washer for this task, it's important to use a low pressure (under 1000 PSI) to avoid forcing too much moisture into the wood, which could lead to mildew or rot.

To flatten a cupped deck board, start by ensuring it’s dry. Then, try flipping the board over so the cupped side faces down and reattach it. If that’s not possible, you can use screws to pull it tighter to the joists or plane the edges slightly to reduce the cup. It’s best to replace severely cupped boards.

Increases livable area and enhances aesthetic, often boosting property appeal.

The best direction for a gate to swing depends on its location and purpose, but swinging inward is the general rule. An inward swing is often considered safer, prevents the gate from opening into public spaces like a sidewalk, and may be required by local building codes.

There are exceptions and specific considerations. If your property is on a slope, an inward swing might not be possible. For a deck gate, it's safest to have it swing away from any steps. In a backyard, the direction can be a matter of preference, though an inward swing can be helpful when carrying heavy items like a wheelbarrow into a garden.

Regardless of direction, ensure the gate can open fully without hitting any objects or blocking spaces. While an inward swing is standard, a gate that can swing both in and out offers the most flexibility if your setup allows for it.

Deck stairs should have at least three stringers rather than two. The recommended minimum width for stairs is 36 inches, and the International Association of Certified Home Inspectors recommends at least three cut stringers to provide sufficient support on wood decking stairs of this width. Generally, stringers should be a maximum of 16 inches apart for wood decking and 12 inches apart for more flexible composite decking.

The Crescent City, FL homeowners’ guide to deck maintenance services

From average costs to expert advice, get all the answers you need to get your job done.