Get matched with top structural engineers in Atlantic Beach, FL

"Pedro is a very professional Structural Engineer. Very knowledgeable."

"Very experienced structural engineer who could analyze our rooftop deck and give us a plan for doing the roof and hotub of our dreams!"

"We had a very good experience with Jon and the crew at Designer Lifestyles. After getting quite a few quotes from many different installers, we went with this team to replace 2,600 square feet of carpet and vinyl with wood and tile. In addition to installing the flooring, they also worked to install new outlets in our floors on the first floor and repaired a hole in the wall created as a result of the new outlets. It was quite a large job and took a bit longer than we expected, but we are very happy with the results. The crews all worked hard and did a great job. Shiloh and the wood flooring team were there every day, right on time, and were very careful with the work they did. They left at the end of each day with a plan as to what was going to happen the next day. Craig was excellent with the tile work and completed his job right on time as well. Overall, it was a very positive experience. The price was in line with the others in the area for a job this large and we believe it was fair. The only thing I would change would be our expectation for how long the job would take. It took longer than we were told, but in the end, with all things considered, we are happy with our new flooring."

"This service may be right for some folks who have no renovation experience, but it wasnâ t right for us. Although we asked questions and read all the available information, we didnâ t get a product that met our needs. The provided .pdf set was nice looking and the service may provide ideas if you donâ t already have an idea what you want to do. Note youâ ll want to review the drawings carefully as we did catch some inaccuracies along the way. Be sure to understand what you are getting for the set fee. We decided to utilize this service to 1) obtain dimensioned drawings we could use for permitting and construction, and 2) see if trained architects could come up with a better layout than we did on our own. Neither objective was realized. 1) the deliverable you get is a .pdf with room dimensions placed in the center of each room. Windows, doors, other features are not dimensioned. Total dimensions are not provided. There is a written scale of â ¼ = 1â â on the drawings, but you have to print to a certain size for that scale to be accurate and then physically measure with a ruler, leading to inaccuracies. Plus, the size you have to print for the scale to work is bigger than a standard printer will print. And thereâ s no way to â playâ with the .pdf (move things around a bit, for example). A file that you can pull dimensions from or make modifications to was not provided on request (â proprietary dataâ was cited). Also, the drawings provided are marked â not for constructionâ and â all structure to be reviewed by a structural engineerâ . Although these .pdfs are cut from a 3D model, you never get to see anything in 3D. 2) When I discussed the project with the company owner, he said weâ d have several meetings with the team to provide input and that the architects would show everything except the specification of support beams. In reality one person spent less than 30 minutes talking to us prior to the new layout being delivered to us. We had several things we didnâ t like about it, but ended up not electing to pay for additional hours (not included in the original fee) to make adjustments. For example, we were adding a main bedroom dedicated bath but their layout required way more plumbing relocation than necessary, and their layout placed entries to the (tiny) new walk-in closets inside the bathroom. Not a layout we could live with. And there was no effort to identify or work with the existing structural support walls, which I specifically asked about prior to signing up. They arenâ t labeled on the drawings and the vault beam on the provided drawings didnâ t even follow the peak of the roof and wouldnâ t have been properly supported where shown (they did move it when I pointed that out). I guess thatâ s why they want to have a structural engineer review everything, but frankly, itâ s a 60â s ranch, the attic is very open and supports are obvious, and all the structural walls have visible concrete blocks under them in the basement. In the end, we decided to go back to making our own field measurements and sketch for the permit, which was granted. The only item we will need a structural review for is the vault support beam, and that input will be provided by the lumber yard once we hire the contractor (this is the normal process)."

"They were excellent. They quickly made a draft that only needed 3 minor adjustments. The final product was exactly what I needed. They referred me to a structural engineer for review. The whole process took half of the time that they initially estimated. I would definitely use them again."

We have a single mission: Complete Customer Satisfaction! We have consistently focused on the needs of our customers, providing personalized attention and a stress-free experience.\nYou will find us to be competitively priced with close attention to the details.\nOur reputation is based on service, safety, and quality, regardless of how large or small the job.\nWe look forward to building a lasting relationship and guarantee your satisfaction!\n

"We are very happy with our decision to have used Warren to design our home. Warren is very detailed, has exceptional design abilities, and was always available. Warren was very thorough in extracting our needs, provided detailed drawings, and coordinating with the truss company. We would recommend Warren to anyone looking to build a custom home."

Terraform Development & Design LLC, delivers expert permit-ready architectural plans and drafting services nationwide. With 8+ years of experience and hundreds of clients across all 50 states, we create code-compliant residential and commercial construction documents that get approved fast and built right.\nFrom site plans, floor plans, elevations, structural & foundation drawings to MEP coordination, full construction sets, 3D renderings, interior design, solar PV layouts, and precise material takeoffs - we handle it all. Fast 4-6 week turnaround, 3 design revisions included, free revisions for city redline changes, transparent pricing (starts at $2,000), and direct partnerships with licensed engineers for stamps in every state.

Specialists in carpentry and interior finish es

I am Anderson Brown, home renovation manager, specializing in full home renovation