Get matched with top door pros in Coventry, CT

While entryways are seldom added to a house to increase the sale price, they are commonly constructed to increase the livability and enjoyment of a home. So, while they aren’t necessary, they do make for a more comfortable and luxurious-feeling home. Entryways are most valuable in areas of extreme heat, cold, or rain, as the space between the living area and the outdoors helps keep the outdoors outside. Plus, snow, wet boots, and mud are all corralled into one space that’s easy to clean.

To move a couch through a narrow doorway, first measure the couch and the doorway to ensure it will fit. For a close fit, you can create more space by removing the interior door; tap out the hinge pins with a nail and shift the door sideways to remove it from its hinges. You may need to turn the couch on its side or move it in separate pieces, if possible. Using furniture sliders can also help you slide the couch through the doorway.

The best direction for a gate to swing depends on its location and purpose, but swinging inward is the general rule. An inward swing is often considered safer, prevents the gate from opening into public spaces like a sidewalk, and may be required by local building codes.

There are exceptions and specific considerations. If your property is on a slope, an inward swing might not be possible. For a deck gate, it's safest to have it swing away from any steps. In a backyard, the direction can be a matter of preference, though an inward swing can be helpful when carrying heavy items like a wheelbarrow into a garden.

Regardless of direction, ensure the gate can open fully without hitting any objects or blocking spaces. While an inward swing is standard, a gate that can swing both in and out offers the most flexibility if your setup allows for it.

To build a standard size, six-panel door yourself, you’ll need four 2-foot by 6-foot boards, one 2-foot by 8-foot or 2-foot by 10-foot board, and a sheet of 3/4-inch, paint-grade plywood. The 2-foot by 6-foot boards will serve as your stiles, top rail, and horizontal and vertical mullions, and the wider board will serve as the bottom rail, which is usually wider than the other horizontal pieces. The plywood will serve as the panels, but you’ll need around five 1-foot by 6-foot boards to make your own panels if you want to stain the door rather than paint it.