Top-rated boiler installation pros.

Get matched with top boiler installation pros in Bristol, CT

Enter your zip and get matched with up to 5 pros

TRUSTED BY BRISTOL, CT HOMEOWNERS

  • Average homeowner rating star icon4.5
    Average homeowner rating
  • Verified reviews icon804
    Verified boiler installation services reviews

Find Boiler installation pros in Bristol

Avatar for Atlantic Water Heater Pros
Atlantic Water Heater Pros
4.8(
51
)
Gas Boiler or Radiator Heating System - Install

Serving Bristol, CT and surrounding areas

Approved

In business since 1998

Free estimates

Emergency services offered

"Williams & Associates replaced an ancient, very large old boiler in my very large house. Bruce calculated the necessary size and found a suitable boiler. He and his crew thoroughly cleared the radiators and lines before removing the old boiler and installing the new one. They checked all the radiators and added new valves as needed during a lengthy checkout. It took several days to do all the work. Throughout, Bruce explained what they were doing and why as well as recommending changes/additions to the original proposal. They were even cheerful about removing the original "Mary Jane" from the basement. I would definitely recommend them to anyone using steam heat. Great job!"
Large Mechanical Room
Response time1 day
Recommended by92%of homeowners
Borselle Plumbing & Heating LLC
4.9(
34
)
Boiler or Radiator Heating System - Install or ReplaceElectric Boiler or Radiator Heating System - InstallGas Boiler or Radiator Heating System - Install+3 more

Serving Bristol, CT and surrounding areas

Approved

In business since 1989

Emergency services offered

Warranties offered

"Joe and Larry were wonderful! We bought a new house that needed work, including a serious issue with how our water heater was installed (without a pressure release valve!). Joe came by and looked at it all and because the situation was dangerous he and Larry came the very next day. Their estimate was clear and the job came in at the estimate (with one small additional nal.repair they found taking a part the toilet.). They walked me through everything and made me feel at ease. These are our new go-to plumbers!!"
Response time2 days
Response rate100%
2 neighbors recently requested a quote
Avatar for Advanced Mechanical Services LLC
Advanced Mechanical Services LLC
4.8(
19
)
Boiler or Radiator Heating System - Install or ReplaceElectric Boiler or Radiator Heating System - InstallGas Boiler or Radiator Heating System - Install+3 more

Serving Bristol, CT and surrounding areas

Approved

In business since 2001

Free estimates

Emergency services offered

"Advanced Mechanical Services (AMS) went out of their way to get our new oil tank installed and the old one removed in the winter. We were experiencing issues with our old tank where our oil company could not fill the old tank. AMS worked closely with us to install the new tank quickly. They kept us in the loop and were on time on installation day. The installers were professional, kept us informed and did an excellent job. In addition, they cleaned up after themselves. We also use them for our annual furnace cleaning. They always do a great job and have come out on emergency calls a few times over the past 25 (or more) years. I highly recommend them."
Response time11 hrs
9 neighbors recently requested a quote
Recommended by100%of homeowners
Avatar for Perfect Timing Heating & Cooling
Perfect Timing Heating & Cooling
5.0(
15
)
Gas Boiler or Radiator Heating System - InstallOil Boiler or Radiator Heating System - InstallElectric Boiler or Radiator Heating System - Install

Serving Bristol, CT and surrounding areas

Approved

In business since 2004

Free estimates

Emergency services offered

"I needed quick service on a 45 year old hot water boiler in a 1938 house I recently purchased.  While I could get the pilot light lit, nothing I did could get the boiler to fire (water was circulating).
On Wednesday I contacted Pelletier Mechanical as Gary (the owner) had been out giving me estimates on the various repairs and modifications I wanted to make.  While Gary was out of the office training (again), Laura his admin arranged for Bill to come out on Friday.  She provided an estimated cost (right on) and a 2 hour window.
Bill showed up on time and after a brief discussion get right to work.  Bill spent about 15 mins. systematically determining why the flame would not light.  He discovered that there the gas was not making it to the main control valve.  He reset the safety shut off valve and the problem was solved.  He then checked all the radiators to make sure that hot water was making it through out the house.  After we determined that the upstairs radiators were not getting hot, Bill checked the water pressure and determined that the pressure was insufficient to fill the upstairs radiators in "real  time".  He suggested that the culprit was the 45 year old water valve and pressure release valve which being cast iron tend to corrode and clog in time.  He proposed a replacement solution and priced it out, and offered to pick up the parts and replace the valves that afternoon.  I decided to wait a few weeks so I could consider replacing the entire boiler.
While we were waiting on the boiler to come up to heat, Bill and I walked through the basement looking at the existing plumbing, tracing the water flow path and discussing the possibility of replacing the hot water tank with a tankless unit. (The hot water run is about 60-65 feet from HW tank to kitchen, bathrooms, etc.)  Bill, like Gary, is knowledgeable and informative.
I will have Pelletier Mechanical  back to do more work on the house."
Gary with his fleet
Mike and his Truck
All Hands On Deck!
The Fleet
The Fleet

+1

Response time7 hrs
Response rate100%
36 neighbors recently requested a quote
Avatar for Precise HVAC Home Services
Precise HVAC Home Services
4.9(
37
)
Oil Boiler or Radiator Heating System - Install

Serving Bristol, CT and surrounding areas

Approved

Super Service Award Winner

In business since 2008

Free estimates

Emergency services offered

"Precise HVAC was wonderful. I actually was going to get more quotes but after working with their salesperson I decided to not even bother. They answered all my questions and made suggestions for things I didn't know about. I'm not even sure I care if I got a better quote or not. With Precise I know that they cross the t's and dotted the eyes and I don't have to worry about missing something."
Water Heater
Water Heater
Furnace
Furnace
American Standard Furnace

+22

Response time5 hrs
Response rate97%
239 neighbors recently requested a quote
...
Showing 1-10 of 77
Install Boiler questions, answered by experts

Depending on the size of your home and system, as well as any upgrades or add-ons you choose, it may take between three and five days to completely replace an existing HVAC system from start to finish. Your contractor should be able to give you an estimate before they begin the actual replacement.

If you have a closed-system boiler that requires an expansion tank, you cannot safely operate it without one, as this risks extensive damage or even explosions. You must find a way to make room for the installation. Options include repositioning the boiler, rerouting the boiler piping to a more open area, or performing minor remodeling to create the necessary space. If you are unsure whether your boiler needs an expansion tank or how to best accommodate one, it's recommended to have a local heating service professional assess the situation. They can confirm the requirement and suggest the most practical solution.

You should get anywhere from three to five quotes for HVAC replacement to get an idea of the average cost of a new unit. Although this quote-collecting process can be time consuming, it allows you to compare what work is required, what type of unit you should install, and how much you should expect to pay for the service.

A home radiator works by using radiation and convection to transfer heat throughout your home. Electric radiators use metal to conduct heat and warm the air, which then rises to warm the room. Steam and hot water radiators work with a boiler and piping system to pump thermal energy throughout the home. Hot water radiators use a boiler to heat the water before circulating it to the radiator, while steam heating radiator systems convert the heated water to steam before circulating it out. When the water or steam cools, it travels back to the boiler to be heated again.

If you go to turn it counterclockwise and it won’t turn anymore, it’s open. Like most other valves, you should be able to turn a radiator valve counterclockwise (to the left) to open it and clockwise (right) to close it. To close a radiator valve, turn it clockwise until you meet some resistance and can’t turn anymore, but do so carefully to avoid breaking the valve.

The Bristol, CT homeowners’ guide to boiler installation services

From average costs to expert advice, get all the answers you need to get your job done.