Get matched with top flooring contractors in Branford, CT

The relative cost of adding an epoxy coating to your garage varies compared to other flooring materials and the type of epoxy. For example, epoxy can cost between $3 to $12 per square foot to install, which typically costs more than other garage flooring options, such as concrete sealers, vinyl, and concrete stain. In comparison, vinyl SPC flooring for garages cost between $3.50 to $8 per square foot and concrete sealer costs $50 to $420, depending on the type of sealant.

Whether you install flooring before or after kitchen cabinets depends primarily on the type of flooring you are using. For materials like hardwood, tile, and sheet flooring, the best practice is to install the flooring first. This ensures the cabinets are installed at the correct height and on a stable surface. However, you should not install cabinets on top of floating floors, such as laminate or luxury vinyl plank (LVP). These types of flooring need room to expand and contract with temperature and humidity changes. Placing heavy cabinets on top can restrict this movement, potentially causing the floor to buckle and making the cabinets unstable. For floating floors, install the cabinets first and then lay the flooring up to them. Other reasons to consider installing cabinets before the flooring include saving money on materials (since you won't need flooring under the cabinets) and avoiding potential damage to your new floor during cabinet installation. Additionally, installing cabinets directly on the subfloor might prevent voiding your flooring's warranty.

Laminate is a sturdy material that lasts 15 to 25 years if it’s properly maintained and isn’t damaged. Laminate with a higher AC rating lasts longer than laminate with a lower AC rating. For the most longevity, put laminate with an AC1 rating in low-traffic areas and use laminate with an AC3 or AC4 rating in high-traffic areas like entryways.

Raising a sunken living room requires help from a professional contractor. The expert will remove existing flooring and trim, reroute utility lines with respect to the new floor level, pour concrete to fill the recessed space, and then let the concrete cure. After the foundation is raised up, the contractor will install the new utility lines, repaint the walls, if necessary, and finish the area with flooring and trim.