Get matched with top septic tank pros in Upper Lake, CA

A septic system's lifespan typically ranges from 15 to 40 years, with a common average of 20 to 30 years. The longevity heavily depends on the tank's material, maintenance diligence, and usage habits. With proper care, lifespans can reach the upper end of this range.

Lifespan by Tank Material:

• Concrete: 20 to 40 years

• Plastic or Fiberglass: 30 to 40 years

• Steel: 15 to 20 years

To maximize your system's lifespan, follow these maintenance best practices:

• Regular Pumping and Inspections: Have the tank pumped every three to five years and schedule professional inspections regularly.

• Mindful Usage: Only flush human waste and toilet paper. Avoid putting items like cat litter, paper towels, cigarette butts, fats, grease, oils, or coffee grounds down your drains.

• Avoid Chemicals: Do not pour harsh chemicals into the system.

• Water Conservation: Reduce the amount of wastewater your system has to process.

• Protect the Drain Field: Avoid driving or building heavy structures over the drain field area.

Wells should be at least 100 feet deep for drinking water, but they may need to be deeper depending on the local geology, water quality, and your household’s water usage. Work with a qualified well drilling professional who can assess the appropriate depth for your well and test the water before drinking it.

The average three to four-bedroom home typically uses a well pump rated for 8 to 12 gallons per minute (GPM). To find the most accurate size for your specific needs, a common rule of thumb is to count the number of water fixtures and appliances in your home and aim for that number in GPM. This calculation allows for about one gallon of water per minute per fixture. Because estimating the correct size can be challenging, it's best to have a professional technician make the final determination. A professional can ensure your pump provides sufficient water for your home, especially during peak usage hours.

How do you set your well’s pressure tank? All you need to do is first drain the tank of water and find the pressure switch. Remove the switch cover and adjust the switch with a wrench—clockwise to increase water pressure, and counter-clockwise to reduce it. Each complete turn of the nut on the switch should equal 2.5 psi. Once this is done, replace the switch cover. All that’s left is to adjust the pressure of the tank itself using an air compressor and a tire gauge to support the new setting.