Get matched with top welders in Pleasanton, CA

Q: How much does it cost to hire a metal fabrication professional?

• <div><p>Professional metal fabricators typically charge around $70 per hour, but the total cost of your project will depend on several factors. The largest cost drivers are the size, complexity, and design of the project, as well as the price and type of metal used. A good way to estimate the total cost is to multiply the cost of raw materials by four; typically, one-quarter of the total goes toward materials and three-quarters toward labor. Your geographic location can also influence costs, as labor and material prices vary by region.</p></div>

Q: How much does welding cost?

• <div><p>The average cost for a welding project is about $300, with typical costs ranging from $125 to $490. However, prices can be as low as $125 for very small jobs or exceed $1,200 for large or complex projects. Welders typically charge an hourly rate between $65 and $150, depending on their experience, and many charge a minimum fee to cover overhead and travel expenses. The total cost is influenced by several factors, including labor, the cost of materials like metal rods and shielding gas, the type of metal being welded, the project's size and complexity, and your geographic location. For a precise quote, it's best to ask a local welder for an estimate based on your specific project.</p></div>

Q: Can you cut up a box spring?

• <div><p>Yes, you can cut up a box spring., but you&rsquo;ll need to do so in layers. You can clear the fabric and fluff away to reveal the springs before removing them as well.</p></div>

Q: Can you cut a shipping container apart?

• <div><p>Yes, but you&rsquo;ll need reliable steel-cutting tools and safety gear to get started. Shipping containers are typically around &frac34; inch thick, so it&rsquo;s entirely possible to cut through them, but experience and the right equipment are very important. When possible, try to get a container as close to the size you want it as possible.</p></div>

Q: How do you cut round ductwork?

• <div><p>Cutting round ductwork requires precision and the right tools. A duct cutter, specifically designed for circular ducts, is ideal. First, mark the cutting line on the duct using a measuring tape and pencil. Then, position the duct cutter's blade on the marked line. Apply steady pressure, rotating the cutter around the duct. The sharp blade creates a clean, precise cut. Alternatively, a reciprocating saw with a metal-cutting blade can be used for larger round ducts. Ensure the duct is securely held in place while making the cut to prevent slips and maintain accuracy.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your welding project in Pleasanton, CA?

Select your specific project to find the pro for you.

Verified Reviews for Welding pros in Pleasanton, CA

*The Angi rating for Welding companies in Pleasanton, CA is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Welding needs.

*The HomeAdvisor rating for Welding companies in Pleasanton, CA is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Welding needs.

Last update on December 31, 2024

Reviewed in December 2024
Re: installing a hand rail in the front porch Juan was excellent about pretty much every aspect of hiring a vendor. Here is why: 1. Professional: replied immediately (within 10 minutes, if that) as soon as I posted the request on this app. He came on time exactly when he said he would...
Decor Iron Works
Request a quote
Reviewed in July 2024
Very professional and the work performed was at high standard & transparent. I will definitely refer Miguels plumbing , electrical and maintenance to friends and family. Thanks again.
Miguel’s Plumbing, Electrical & Maintenance
Request a quote
Reviewed in March 2024
I hired max to help with a fence project. He came out in a timely manner and did an excellent welding up our damaged fence.
MDM WELDING AND FABRICATION
Request a quote
Reviewed in July 2023
Highly recommend!! Adamik’s did a complete re-pipe on my older home. Took it from old galvanized to copper! I have used them on smaller jobs too and they do excellent work!!!
ADAMIK'S AMERICAN PLUMBING DRAIN AND BACKFLOW
Request a quote
Reviewed in August 2022
Frank is an amazing contractor, and he always made sure to ask my wife and I exactly what we were planning to do and the steps to get there before doing it to his fullest extent. We have never met a contractor so enthusiastic and sharp to his craft. -Luis & Megan
A 5 Star Contractor, Inc.
Request a quote
Reviewed in July 2022
We had an unexpected leak in the middle of our yard which was a significant leak. We called several companies, but Oswald was immediately available which was very helpful since PG&E turned off the water to the house. He came back the next morning early and fixed the water main which also...
Perez Sprinkler Repair
Request a quote
Reviewed in March 2021
POOR WORKMANSHIP AND GREAT SALESMANSHIP We hired ATP plumbing to do our entire house a job that at the time was estimated to be $15,000. Mr.Peterson offered hourly for high-quality workmanship we ended up spending nearly $50,000 last week I called him that my ceiling is coming down and we need...
ATP Plumbing - Ask the Professional Plumbing
Request a quote
Reviewed in August 2020
Work quality was reduced because one of the welds failed soon after the technician left, necessitating a call back for next day. Issue was fixed by same tech upon return. Overall, satisfied with this service call.
Better Water Heaters, Inc.
Request a quote
Reviewed in February 2014
It took a long time to get fence done. Other fencing companies no response. This company is a welder and was the only one to do work. To put up a new fence will cost more. Their rates reasonable. You don't have to replace your whole fence. Just repair it. They were quick at welding fence...
DHR Welding
Request a quote
Reviewed in April 2013
They were on the job before 8am. The old pump dug out and new one installed by noon. The Sump Pump is working perfectly and beautifully. They were professional, friendly, well mannered. Left everything looking clean. <br /> I liked their work so much I decided on the spot, to replace my 35...
R.B. Travis Plumbing
Request a quote

Find Welders in Pleasanton

V B Steel Works

4.8(

)

Serving Pleasanton, CA and surrounding areas

Approved

Super Service Award Winner

In business since 2023

Free estimates

Offers commercial services

"Immediately available. Quality welding work. Totally professional."

Response time10 hrs

Recommended by7%of homeowners

Request Quote

CANTU'S FABRICATION & WELDING SERVICES

5.0(

)

Serving Pleasanton, CA and surrounding areas

Approved

Super Service Award Winner

In business since 2014

Free estimates

Emergency services offered

"Carlos did a excellent job on my fence. Made it very clear on what the process was going to be and when he would finish. He will be continuing to work on my future projects."

Response time10 hrs

1 neighbors recently requested a quote

Serving Pleasanton, CA and surrounding areas

Approved

Super Service Award Winner

In business since 2024

Free estimates

Warranties offered

"Great. The work was excellent and efficiently done. Great comunication through the project. Would highly recommend."

+22

Response time2 days

3 neighbors recently requested a quote

Recommended by71%of homeowners

Serving Pleasanton, CA and surrounding areas

Approved

Free estimates

Emergency services offered

Warranties offered

"Nick and his crew at Fence Dr. absolutely nailed it!! I’m a pretty handy guy but I don’t do fences and the job was large, so I was apprehensive to say the least. Nick was able to give me some great ideas as well as pointed out somethings I wanted that just weren’t feasible and in the end, made my vision a reality. The price was very reasonable considering the cost of lumber, and the craftsmanship was outstanding and well worth it. Polite and professional the crew showed up on time, completed the job within the timeframe we specified and they cleaned up the job site when they finished. I absolutely love my new fence and I will definitely be recommending Fence Dr to anyone who has the need!"

+28

Response time3 days

2 neighbors recently requested a quote

Recommended by90%of homeowners

Serving Pleasanton, CA and surrounding areas

In business since 2016

Free estimates

Credit card accepted

"Showed up on time, was very informational so o understood what he would be doing. His quality of work a d customer service was outstanding. I'd recommend him and his services to anyone who needs work done using his skill set. He was the perfect person for the job."

break metal cladding around Fleetwood sliders

Response time2 days

Recommended by100%of homeowners

Serving Pleasanton, CA and surrounding areas

In business since 2007

Free estimates

Emergency services offered

"Creig was extremely professional and responsive. He got everything done on the list (which grew by a couple of items during his first visit to the home to provide an estimate). Due to the urgency of getting the home ready for professional photos and listed for sale, Creig agreed to perform the work on a Saturday, even though he already had one job scheduled that day. He stayed until 10:00 p.m. on Saturday, in order to get the work done. I will definitely call him again for any home repairs!
"

Recommended by100%of homeowners

Request Quote

John Arthur Welding Inc

5.0(

)

Serving Pleasanton, CA and surrounding areas

In business since 2020

Small jobs welcome

Offers commercial services

"Got work done the next day! Very professional. Communication is on point. Is a servant of the most high!"

+15

Response time2 hrs

Response rate98%

Recommended by100%of homeowners

Request Quote

MDM WELDING AND FABRICATION

5.0(

)

Serving Pleasanton, CA and surrounding areas

In business since 2020

Free estimates

Credit card accepted

"My wife and I added a new addition to our home which needed custom Handrails, I reached out to MDM Welding and Fabrication, I got a quick response, he came out , quoted us and we went with him because he is very professional and straight forward. He did an absolutely amazing job, went above and beyond. Highly recommended!!!"

Recommended by100%of homeowners

Serving Pleasanton, CA and surrounding areas

In business since 2017

Free estimates

"They are professional for my project, they were easy to communicate with. I will do business with them again."

Response time2 hrs

Recommended by100%of homeowners

Request Quote

Navarro's Welding & Fabrication

2.4(

)

Serving Pleasanton, CA and surrounding areas

In business since 2015

Free estimates

"These folks are real craftsmen. They built the handrails in my garage."

decretive main gate with only outside exposed lock

+24

Response time1 day

Recommended by85%of homeowners

Request Quote

Showing 1-10 of 29

Welding questions, answered by experts

Professional metal fabricators typically charge around $70 per hour, but the total cost of your project will depend on several factors. The largest cost drivers are the size, complexity, and design of the project, as well as the price and type of metal used. A good way to estimate the total cost is to multiply the cost of raw materials by four; typically, one-quarter of the total goes toward materials and three-quarters toward labor. Your geographic location can also influence costs, as labor and material prices vary by region.

The average cost for a welding project is about $300, with typical costs ranging from $125 to $490. However, prices can be as low as $125 for very small jobs or exceed $1,200 for large or complex projects. Welders typically charge an hourly rate between $65 and $150, depending on their experience, and many charge a minimum fee to cover overhead and travel expenses. The total cost is influenced by several factors, including labor, the cost of materials like metal rods and shielding gas, the type of metal being welded, the project's size and complexity, and your geographic location. For a precise quote, it's best to ask a local welder for an estimate based on your specific project.

Yes, you can cut up a box spring., but you’ll need to do so in layers. You can clear the fabric and fluff away to reveal the springs before removing them as well.

Yes, but you’ll need reliable steel-cutting tools and safety gear to get started. Shipping containers are typically around ¾ inch thick, so it’s entirely possible to cut through them, but experience and the right equipment are very important. When possible, try to get a container as close to the size you want it as possible.

Cutting round ductwork requires precision and the right tools. A duct cutter, specifically designed for circular ducts, is ideal. First, mark the cutting line on the duct using a measuring tape and pencil. Then, position the duct cutter's blade on the marked line. Apply steady pressure, rotating the cutter around the duct. The sharp blade creates a clean, precise cut. Alternatively, a reciprocating saw with a metal-cutting blade can be used for larger round ducts. Ensure the duct is securely held in place while making the cut to prevent slips and maintain accuracy.

The Pleasanton, CA homeowners’ guide to welding services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Angi
•
May 30, 2026May 30, 2026
How Much Does a Wrought Iron Railing Cost? [2026 Data]
Discover how much a wrought iron railing costs. Get detailed price breakdowns, installation factors, and tips to save on your new railing project.
Kelly Weimert
•
May 30, 2026May 30, 2026
How Much Does a Pipe Fence Cost? [2026 Data]
Pipe fencing is an extremely strong, durable option for containing horses and other livestock. This guide breaks down the factors that affect pipe fence cost.
Angi
•
May 3, 2026May 3, 2026
How Much Does Awning Repair Cost? [2026 Data]
Discover the average awning repair cost, key price factors, and expert tips to help you budget and save on your next awning repair project.
Angi
•
May 21, 2026May 21, 2026
How to Hire a Wrought Iron Fence Installer
Learn how to hire a wrought iron fence installer with confidence. Find qualified pros, ask the right questions, and get expert tips for your project.
Sara Coleman
•
Apr 6, 2026Apr 6, 2026
Journeyman Carpenter vs. Carpenter: Who to Hire for Your Project
While both can perform most carpentry work required for house projects, the major difference between a journeyperson vs. a master carpenter is their years of experience.
Jouviane Alexandre
•
May 3, 2026May 3, 2026
What is a Stair Stringer? Everything You Need to Know Before You Build
Stair stringers support every step you take. From wood to steel, open to closed—explore the different types, materials, and whether to DIY or hire a pro.