How do I choose a metal fabricator?

• <div><p>Choosing the right metal fabricator for your project begins with research. Find a reputable fabrication company by searching for reputable contractors in your area, and then reviewing photos of their previous work, customer reviews, and photos of the company’s workshop.</p><p>Once you’ve narrowed down the list, contact the companies to ask about the types of metal fabrication projects they specialize and inquire about guarantees and warranties on workmanship. You should also ensure the company uses high-quality material, and ask about the schedule and turnaround time for your proposed project.</p></div>

Can you cut a shipping container apart?

• <div><p>Yes, but you’ll need reliable steel-cutting tools and safety gear to get started. Shipping containers are typically around ¾ inch thick, so it’s entirely possible to cut through them, but experience and the right equipment are very important. When possible, try to get a container as close to the size you want it as possible.</p></div>

Get matched with top welders in Clayton, CA

Q: Can you cut up a box spring?

• <div><p>Yes, you can cut up a box spring., but you&rsquo;ll need to do so in layers. You can clear the fabric and fluff away to reveal the springs before removing them as well.</p></div>

Q: How do I maintain custom or fabricated metal structures?

• <div><p>To maintain custom or fabricated metal structures and extend their lifespan and appearance, perform regular cleaning, apply rust prevention treatments, and use protective coatings.</p></div>

Q: Can you cut a shipping container apart?

• <div><p>Yes, but you&rsquo;ll need reliable steel-cutting tools and safety gear to get started. Shipping containers are typically around &frac34; inch thick, so it&rsquo;s entirely possible to cut through them, but experience and the right equipment are very important. When possible, try to get a container as close to the size you want it as possible.</p></div>

Q: What are the most common types of welding?

• <div><p>Welders use a variety of methods in their trade. Different types of welding are better suited for different purposes and contexts. For example, stick welding is a versatile form suitable for most metals and alloys. The most common types of welding include:</p><ul><li><p>Stick welding: $100&ndash;$1,000</p></li><li><p>Metal Inert Gas (MIG) welding: $250 and up</p></li><li><p>Tungsten Inert Gas (TIG) welding: $250 and up</p></li><li><p>Gas welding: $150 and up</p></li><li><p>Forge welding: $15&ndash;$25 per hour</p></li></ul><p></p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your welding project in Clayton, CA?

Select your specific project to find the pro for you.

Verified Reviews for Welding pros in Clayton, CA

*The Angi rating for Welding companies in Clayton, CA is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Welding needs.

*The HomeAdvisor rating for Welding companies in Clayton, CA is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Welding needs.

Last update on March 07, 2024

Reviewed in March 2024
My wife and I added a new addition to our home which needed custom Handrails, I reached out to MDM Welding and Fabrication, I got a quick response, he came out , quoted us and we went with him because he is very professional and straight forward. He did an absolutely amazing job, went above and...
MDM WELDING AND FABRICATION
Request a quote
Reviewed in November 2023
Eddie's Plumbing Eddie was very professional and explained with need to be done to correct the plumbing problem. He replaced the worn pipes and welded them together. The pipes no longer leak, and the sprinkler system is working. I would highly recommend Ed for any plumbing job.
Americana Plumbing Solutions, Inc.
Request a quote
Reviewed in July 2022
We had an unexpected leak in the middle of our yard which was a significant leak. We called several companies, but Oswald was immediately available which was very helpful since PG&E turned off the water to the house. He came back the next morning early and fixed the water main which also...
Perez Sprinkler Repair
Request a quote
Reviewed in November 2018
This company was pleasure to work with. They made contact with me on Monday and was out to my house the next day to access my heating and AC needs. Rudy V. went over my replacment options. I added that I also wanted two zones and Nest thermostats. Thursday they installed the furnace and air...
global comfort heating and air
Request a quote
Reviewed in February 2016
<p>On my way out the door this morning I noticed that water was leaking from the control pipe we have coming out of hot water heater that leads to outside on front patio. Freaked out thinking the hot water heater was busted.</p> <p><br /></p> <p>As I was getting in the car I yelled to my...
SAVIOR PLUMBING
Request a quote
Reviewed in June 2014
Mr. Moreci was very polite, prompt, and professional. He could tell at a glance why both the bathtub and shower were leaking, and properly repaired the botched jobs done by a prior plumber. The bathtub repair required welding to extend the water pipe to actually connect to the faucet. I would...
Independent Plumbing
Request a quote
Reviewed in February 2014
It took a long time to get fence done. Other fencing companies no response. This company is a welder and was the only one to do work. To put up a new fence will cost more. Their rates reasonable. You don't have to replace your whole fence. Just repair it. They were quick at welding fence...
DHR Welding
Request a quote
Reviewed in June 2013
It was a very good experience. I was able to get someone on the phone immediately and a plumber was sent to our house that afternoon. <br /> Chris from Guaranteed Plumbing did a great job. You could tell he takes great pride in his work. The copper line was next to a plastic pipe. He had to...
GUARANTEED PLUMBING
Request a quote
Reviewed in July 2012
The quality of the furnace and duct work equipment was very good. However, they missed one appointment, and were late for another. They had to come back two times to fix a gas leak, and then a coolant leak (bad welds). They promised to remove all asbestos, but after the work was done, they...
Service Champions Heating & Air Conditioning
Request a quote
Reviewed in October 2005
BIG SKY WELDING CAME OUT TO OUR HOME AND REPAIRED THE WELDS ON THE SWING SET. THEY DID A GREAT JOB. THE MAN SHOWED UP ON TIME, WAS VERY FRIENDLY, AND HELPFUL. THE WELD HAS HELD UP JUST GREAT.
BIG SKY WELDING
Request a quote

Welding questions, answered by experts

Choosing the right metal fabricator for your project begins with research. Find a reputable fabrication company by searching for reputable contractors in your area, and then reviewing photos of their previous work, customer reviews, and photos of the company’s workshop.

Once you’ve narrowed down the list, contact the companies to ask about the types of metal fabrication projects they specialize and inquire about guarantees and warranties on workmanship. You should also ensure the company uses high-quality material, and ask about the schedule and turnaround time for your proposed project.

Yes, you can cut up a box spring., but you’ll need to do so in layers. You can clear the fabric and fluff away to reveal the springs before removing them as well.

To maintain custom or fabricated metal structures and extend their lifespan and appearance, perform regular cleaning, apply rust prevention treatments, and use protective coatings.

Yes, but you’ll need reliable steel-cutting tools and safety gear to get started. Shipping containers are typically around ¾ inch thick, so it’s entirely possible to cut through them, but experience and the right equipment are very important. When possible, try to get a container as close to the size you want it as possible.

Welders use a variety of methods in their trade. Different types of welding are better suited for different purposes and contexts. For example, stick welding is a versatile form suitable for most metals and alloys. The most common types of welding include:

Stick welding: $100–$1,000
Metal Inert Gas (MIG) welding: $250 and up
Tungsten Inert Gas (TIG) welding: $250 and up
Gas welding: $150 and up
Forge welding: $15–$25 per hour

The Clayton, CA homeowners’ guide to welding services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Angi
•
Apr 4, 2026Apr 4, 2026
How Much Does Wrought Iron Railing Repair Cost? [2026 Data]
Get expert insights on wrought iron railing repair cost, including average prices, key cost factors, and tips to save on your next project.
Rachel Hoffman
•
May 30, 2026May 30, 2026
How Much Does Welding Cost? [2026 Data]
Get a clear estimate of welding cost for your next project. Learn what impacts welding prices, compare DIY vs. pro rates, and discover ways to save.
Scott Dylan Westerlund
•
May 30, 2026May 30, 2026
How Much Does Sheet Metal Fabrication Cost? [2026 Data]
Get transparent sheet metal fabrication cost info for your project. Learn what impacts price, compare options, and plan your project with confidence.
Angi
•
May 21, 2026May 21, 2026
How to Hire a Steel Beam Installation Company
Find the right steel beam installation company for your project. Learn what questions to ask, qualifications to check, and how to ensure structural safety.
Scott Dylan Westerlund
•
May 2, 2026May 2, 2026
PEX vs. Copper: Which Is Better for Your Home’s Plumbing?
Learn how to choose between PEX versus copper by learning about the pros and cons of both of these popular residential plumbing options.
Angi
•
May 21, 2026May 21, 2026
How to Hire a Wrought Iron Fence Installer
Learn how to hire a wrought iron fence installer with confidence. Find qualified pros, ask the right questions, and get expert tips for your project.