Get matched with top window and door contractors in Pajaro, CA

Window screens are available in several standard sizes. Common dimensions include 24 to 36 inches wide by 36 to 48 inches tall, as well as sizes like 18 by 14 inches and 20 by 20 inches. These often correspond to standard window sizes, such as 2 feet wide by 3 feet tall or 4 feet wide by 6 feet tall. Screens are also sold in replacement rolls to accommodate various dimensions. It is always best to measure your windows for accuracy before a repair or replacement. If your windows are a non-standard size, you will likely need to order custom screens, which can increase the cost. However, a screen does not necessarily have to fit the entire window, so you may be able to use a standard-size screen even if your window is slightly larger.

Yes, you can absolutely put a screen on a casement window, and most casement windows come with screens. Unlike with a double-hung, single-hung, or sliding window, the screen in a casement window sits on the inside of the window so that the sash can freely open outward. Screens are especially important for casement windows because the large window opening the window provides leaves your home more open to bugs and outside debris than most other types of operable windows.

If your door has interchangeable inserts, you’ll likely want to swap the glass out for a screen during the summer months. The process to do so will vary by door, but you’ll follow these general steps: First, use a flathead screwdriver to pop out the retainer strips—the plastic strips running down both long (and sometimes all four) sides of the door. Then gently pull them out by hand. Carefully remove the glass insert from the door and replace it with the screen. Finally, push the plastic retainer strips back into place, working from top to bottom.

Window seals don’t last forever, so they’ll inevitably fail for one reason or another. One of the most common reasons is the expansion and contraction of the glass. When the glass gets warm from sunlight, it expands and adds pressure to the seal; at night, as the glass cools, it contracts. This process, day in and day out, can eventually cause the seal to fail. Other common sources of failure include the house settling over time, chemicals that damage the seal when repainting windows, and incorrect window installation.