How Much Does Window-to-Door Conversion Cost? [2026 Data]

Door service costs depend on your project and location. Check with a local pro for your specific job.

Get quotes from door pros near you
No obligation · 100% free
Get quotes from door pros near you
No obligation · 100% free
Cost Insights:
  • Window-to-door conversions range from $2,000 to $9,000, with your total set by door type and framing changes.

  • Your window size and wall type drive labor, load-bearing walls need headers, and bigger openings need more framing.

  • You should budget permit fees from $150 to over $1,000, plus demolition, debris removal, and interior finishing.

  • Hiring a local door installation professional ensures your conversion meets code and supports resale value, with 60% to 75% ROI.

This article was created using automation technology and thoroughly fact-checked and edited by an Angi Editor in accordance with our AI policy.

In 2026, the national average cost for a window-to-door conversion is $6,300. Most projects fall between $2,000 and $9,000, with the cost driven by the size of the opening, the type of door material, and whether structural modifications are required. If your project involves a load-bearing wall or a custom door, expect costs to land toward the higher end of that range.

Window-to-Door Conversion Cost by Size: Opening Dimensions

The dimensions of your existing window and your target door size are among the strongest cost drivers in a window-to-door conversion, with single-door conversions starting around $1,200 and sliding-door conversions reaching $12,000. 

Standard options include single doors, French doors, and sliding doors, and keeping the conversion close to the existing opening size is typically the most budget-friendly approach. Larger openings, such as double-door or wide sliding configurations, require additional framing, wall modifications, and finishing work that push costs higher. 

Costs vary by conversion type and opening size, as the table below shows:

Conversion TypeOpening Size (In.)Average Cost Range in 2026
Single door32–36 $1,200–$4,500
French doors60–72 $3,500–$8,500
Sliding door60–96 $4,000–$12,000

Window-to-Door Conversion Cost by Type: Door Options

The type of door you choose is one of the most direct drivers of project complexity and cost, with standard exterior doors sitting at the lower end and fully custom doors at the highest. Common options include standard exterior doors, French doors, sliding glass doors, and patio doors, each offering a different balance of aesthetics, security, and energy efficiency. 

Custom doors cost more than standard sizes, particularly when unique materials or specialty features are involved, so costs vary meaningfully depending on which option you select.

The following table outlines the differences between different door types:

Door TypeDescriptionCost Impact in 2026ProsCons
StandardBasic exterior, solid or paneledLowestSecure, simple, affordableLess natural light
FrenchDouble doors with glass panesModerate to highElegant, lots of light, wide openingHigher installation cost
SlidingLarge glass panels, slide openHighMaximizes view, space-savingMore complex install
PatioHinged or sliding, glass panelsModerate to highConnects to the outdoor spaceVaries by configuration
CustomAny size/material, fully bespokeHighestTailored fit/designMost expensive

Window-to-Door Conversion Costs by Location: Where Prices Vary

Where you live has a meaningful impact on your window-to-door conversion cost, since labor rates, material prices, and local building codes all vary by region, with urban areas typically running higher than rural communities. 

Some climates also require more extensive weatherproofing, and stricter local permitting can add both fees and time to your project. Before work begins, check with your local building department to understand permit requirements and any climate-specific standards that apply in your area.

Window-to-Door Conversion Cost Factors: What Affects the Price?

Several factors influence your total window-to-door conversion cost. Let's break down the biggest contributors.

Labor

Professional labor is a major portion of your window-to-door conversion budget, with hourly rates ranging from $50 to $150 depending on your region and the contractor's experience. The work typically involves demolition of the existing window, framing the new opening, installing the door, and completing finish work, with contractors, carpenters, and sometimes structural engineers all playing a role. 

Projects that require electrical rerouting or structural modifications demand more hours and specialized expertise, which increases the overall labor cost.

Permits

Most window-to-door conversions require at least a building permit, and sometimes additional structural or electrical permits, with building permit costs ranging from $100 to $1,000 or more depending on your municipality. Inspections are often required both before and after the work, and permit timelines can add days or weeks to your project schedule. Factor these fees and potential delays into your budget from the start.

Additional Features

Upgrades can significantly add to your window-to-door conversion cost:

  • Sidelights, transom windows, custom glass, and decorative hardware all increase the final price. 

  • Security features, such as reinforced or smart locks, are popular for exterior doors. 

  • Energy efficiency improvements—such as insulated doors and advanced weatherstripping—enhance comfort and reduce long-term energy bills. 

  • For accessibility, wider doorways and low thresholds are available, though these may require additional framing or hardware.

Service Add-Ons

Project complexity is a key driver of add-on costs, with load-bearing wall conversions running higher than non-load-bearing ones because they require structural supports. Site accessibility, both indoors and outdoors, can also affect labor time and the ease of installation. 

Demolition, debris removal, and post-installation repairs to siding, drywall, or trim all add to your total, and custom designs may bring architectural fees as well. Some projects also require pre- and post-construction inspections, each carrying its own fee.

Window-to-Door Conversion Additional Costs: What to Budget For

When budgeting for a window-to-door conversion, consider the following potential additional expenses.

Warranties

Most new doors come with manufacturer warranties that cover defects or premature wear, and many contractors also offer a workmanship warranty on the installation itself. While warranties can add a small up-front cost, they provide meaningful long-term protection that can save you money if issues arise after the project is complete.

Maintenance

Ongoing maintenance costs depend on your door material, with annual expenses ranging from $20 to $150 based on material type and exposure. Wood doors require regular sealing or painting to prevent rot and may incur repair fees over time, while fiberglass and steel doors are lower-maintenance but still benefit from occasional cleaning or touch-ups. Glass doors need regular cleaning and may eventually require hardware or seal replacement.

Taxes

Sales tax on materials and labor applies in most states, so include it when building your budget. Adding a new exterior door may also slightly increase your property value, which could affect your property taxes, so check with your local tax assessor for details specific to your area.

Insurance

Adding a new door changes your home's entry points and may require you to update your homeowners insurance policy, particularly if security features or energy upgrades are part of the project. 

Here's how insurance costs compare by approach:

ApproachTotal Cost in 2026
DIY$800–$2,500
Hiring a pro$2,500–$12,000

Does a Window-to-Door Conversion Add Value to Your Home?

Window-to-door conversions can offer a strong return on investment, especially if they increase accessibility, light, or connection to outdoor spaces. Many homeowners see an ROI of 60% to 75%, depending on location and quality of work. 

This upgrade enhances curb appeal, functionality, and often boosts resale value, especially when incorporating energy-efficient or universally accessible features. Compared to other renovations, window-to-door conversions are a solid choice for both enjoyment and added value.

Tips to Reduce Window-to-Door Conversion Costs

To keep your window-to-door conversion within budget, consider the following tips:

  • Get multiple quotes from licensed contractors for the best pricing.

  • Choose standard-size doors and avoid custom features when possible.

  • Reuse existing framing or hardware if in good condition.

  • Schedule work during off-peak seasons for potential discounts.

  • Handle demolition or finishing work yourself if skilled.

  • Purchase materials directly to avoid contractor markups.

  • Check for local rebates or incentives for energy-efficient doors.

Why You Should Hire a Window-to-Door Conversion Pro

Some homeowners consider converting a window to a door themselves to save on labor. While DIY can cut costs, it comes with increased risks and challenges. DIY costs include materials, tools (such as saws, drills, and safety gear), and permit fees. You’ll need carpentry and finishing skills, and possibly experience with structural work or electrical rerouting. 

Hiring a local door installer costs more upfront but ensures safe, code-compliant work and a finished look. 

Here’s why it’s ideal to hire a window-to-door conversion pro

Converting a window to a door is a complex process. Here’s why it’s best to hire a pro for the job:

  • Pros know how to prevent structural issues, leaks, and settlings around the opening.

  • Working with a reputable pro ensures compliance with local building codes and zoning regulations.

  • Seasoned experts have the tools, equipment, and expertise to cut, frame, and install your new door safely.

  • DIY mistakes can lead to misalignment, water infiltration, and costly structural issues.

  • Professionally done conversions ensure functionality, safety, and aesthetics that help to increase home value and ROI.

If you want to DIY a window-to-door conversion

To assist with the conversion process, consider handling the following DIY tasks:

  • Clear the area around the window for easy access.

  • Have tools, materials, and equipment nearby and easily accessible for your pro.

  • Protecting the surrounding area with drop cloths and protective coverings.

  • Move or arrange furniture once the conversion is complete.

  • Clean up debris and keep the workspace safe during the conversion process.

Next Steps: Finalize Your Project With a Pro
  • Be ready to discuss the details of your project with the pro, including the door size, type, and design.

  • Provide your pro with the exact measurements and have a clear idea of the desired placement of your new door.

  • Inquire about the cost of add-ons, such as upgraded hardware, custom trim, or security features.

  • Leave room in your budget for unexpected labor, materials, or add-on costs.

How Angi Gets Its Cost Data

Home is the most important place on earth, which is why Angi has helped more than 150 million homeowners transform their houses into homes they adore. To help homeowners with their next project, Angi provides readers with the most accurate cost data and upholds strict editorial standards. We extensively research project costs to develop the pricing data you see, so you can make the best decisions for you and your home. We rely on reputable sources, including the U.S. Bureau of Labor Statistics, academic journals, market studies, and interviews with industry experts—all to ensure our prices reflect real-world projects. 

Want to help us improve our cost data? Send us a recent project quote to [email protected]. Quotes and personal information will not be shared publicly.

Need professional help with your project?
Get quotes from top-rated pros.

The homeowners guide to door services

From average costs to expert advice, get all the answers you need to get your job done.