Best countertop and backsplash pros near Davis, CA

Durable, contemporary concrete countertops can increase home values. However, they might not offer as high an ROI as quartz or granite surfaces, which offer a timeless aesthetic and durability likely to appeal to a range of home buyers. Installing new countertops is a home improvement that can yield an average of 60% to 80% ROI when done well, using quality, perennially popular materials.

Formica® is a brand name for the laminate countertops it produces. Laminate is the generic term for a countertop material made from layers of paper topped with an image layer, all compressed under high pressure to form a solid, easy-to-maintain surface. Other brands that produce laminate countertops include WilsonArt® and Arborite®.

When comparing Formica to other laminates, the choice often comes down to personal preference. Formica is a popular brand known for its durability and affordability. Due to its brand recognition, it may be slightly more expensive than generic laminate options, but the name often carries an expectation of a certain quality standard.

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

The frequency for sealing granite countertops depends on several factors, including the type of sealant used, the color of the granite, and how heavily the countertops are used. As a general guideline, resealing is often recommended every 12 to 18 months, but some sources suggest it could be as often as every few months or at least once a year.

The type of sealant is a major factor: water-based sealants may need reapplication every six months to a year, while more durable solvent-based sealants can last for five to 10 years. Additionally, factors like heavy kitchen traffic, frequent use of acidic cleaners, and lighter granite colors may require more frequent sealing to prevent staining.

To determine if your countertops need resealing, you can perform a simple water test. Place a few drops of water or a wet paper towel on an inconspicuous area of the granite. After 10 to 15 minutes, check the spot. If the water has beaded up, the seal is still intact. If the water has been absorbed and darkened the stone, it's time to apply a new coat of sealant. You can choose to seal the granite yourself or hire a professional to ensure it's done correctly.