Best door pros near Capistrano Beach, CA

Most of the time, a squeaky door is the result of dry hinges, where metal parts rub together without enough lubrication. Dirt, dust, or rust can also build up inside the hinge and add to the friction. Loose screws or slight misalignment can shift things just enough to create that irritating squeaking noise. Worn-out hinges or swelling wood from humidity changes can also be part of the problem on older doors. A good cleaning and proper lubrication usually take care of it, but if the squeak sticks around, it’s worth checking for bigger issues with the hinges or alignment. 

Ideally, a gate should be able to swing both in and out. However, if it can only open in one direction, it is generally best for it to swing inward. This is often the safest option, especially for deck gates near steps, as you'll want the gate to swing away from the stairs. An inward swing also prevents the gate from opening into a public space, like a sidewalk, and can be more convenient when carrying heavy items like a wheelbarrow into a garden.

There are exceptions, however. The layout of your property may require a different approach. For example, if your property is on a slope, the gate may not be able to swing inward. You should also ensure the gate can open fully without colliding with any objects or blocking access to other areas. For a backyard garden gate where public access isn't a concern, the direction it swings is largely a matter of personal preference. Finally, always check your local building codes, as they may have specific requirements for which way a gate must swing.

You want a small gap of 1/8 of an inch between the door and the jamb. However, the gap size depends on the direction the door swings and whether it contains glass. You will also want to aim for the same size gap on all sides of the door, so it opens and closes smoothly.

To build a standard size, six-panel door yourself, you’ll need four 2-foot by 6-foot boards, one 2-foot by 8-foot or 2-foot by 10-foot board, and a sheet of 3/4-inch, paint-grade plywood. The 2-foot by 6-foot boards will serve as your stiles, top rail, and horizontal and vertical mullions, and the wider board will serve as the bottom rail, which is usually wider than the other horizontal pieces. The plywood will serve as the panels, but you’ll need around five 1-foot by 6-foot boards to make your own panels if you want to stain the door rather than paint it.