Top-rated cabinet makers.

Get matched with top cabinet makers in Marana, AZ

There are 4 highly-rated local cabinet makers.

Need a pro for your cabinet making project in Marana, AZ?

Select your specific project to find the pro for you.

TRUSTED BY MARANA, AZ HOMEOWNERS

  • Average homeowner rating star icon4.6
    Average homeowner rating
  • Verified reviews icon97
    Verified cabinet making services reviews

Find Cabinet makers in Marana

Avatar for D-RENOVATOR LLC

D-RENOVATOR LLC

No reviews yet

D-RENOVATOR LLC

No reviews yet
8 years of experience

20+ yrs experience doing kitchen and bathrooms, really enjoy creating masterpieces, we do ground up builds and full remodels interior and exterior, paint cabinets granite quartz countertops backsplashes , windows and doors outside BBQ patios and courtyards

20+ yrs experience doing kitchen and bathrooms, really enjoy creating masterpieces, we do ground up builds and full remodels interior and exterior, paint cabinets granite quartz countertops backsplashes , windows and doors outside BBQ patios and courtyards


J&T Remodeling

No reviews yet

J&T Remodeling

No reviews yet
Free onsite estimate

At J&T Remodeling we specialize in a wide variety of remodeling/ restoration needs. With more than 25 years in the industry we have developed ways to do every job with top notch quality and make sure we always come in at or under budget. We specialize in Plumbing, framing, tile, cabinets and countertops, doors and windows, roof coating, painting, electrical, ect.

At J&T Remodeling we specialize in a wide variety of remodeling/ restoration needs. With more than 25 years in the industry we have developed ways to do every job with top notch quality and make sure we always come in at or under budget. We specialize in Plumbing, framing, tile, cabinets and countertops, doors and windows, roof coating, painting, electrical, ect.


Arizona Residential Commercial Photography

No reviews yet

Arizona Residential Commercial Photography

No reviews yet
4 years of experience

Arizona Residential and Commercial Photography ArcPho.com Basic Prices: SMALL- (25) Photos - $165 - Recommended for < 2500 sqft. or Vacant Homes STANDARD - (40-70) Photos - $225 - Recommended for Most Homes PER PHOTO - $8.75/photo - Projects Requiring (15) Photos or Less - (10) Shot Minimum About Me : ✓ASU Alumni ✓BA in GIT Areas of Study - ✓Commercial Photography and ✓Web Design ArcPho.com

Arizona Residential and Commercial Photography ArcPho.com Basic Prices: SMALL- (25) Photos - $165 - Recommended for < 2500 sqft. or Vacant Homes STANDARD - (40-70) Photos - $225 - Recommended for Most Homes PER PHOTO - $8.75/photo - Projects Requiring (15) Photos or Less - (10) Shot Minimum About Me : ✓ASU Alumni ✓BA in GIT Areas of Study - ✓Commercial Photography and ✓Web Design ArcPho.com


Eggersmann Studio Scottsdale

No reviews yet

Eggersmann Studio Scottsdale

No reviews yet

Oldest family-owned German kitchen manufacturer. Highest quality and greatest variety of finishes in German kitchen furniture, home living solutions, and Schmalenbach luxury closets. Our diverse materials and finishes can be made completely unique using processes to alter or colorize for a one-of-a-kind kitchen, living room, office, or closet. Visit our Scottsdale showroom to discover the beauty that precision and modern cabinetry with amazingly useful drawers and accessories can bring to your cooking and food prep areas, living areas, and closets. Unique quality raw materials. Innovative style and function. Limitless color choices, unique cabinet materials such as stone, steel, and specialty veneers with innovative, original finishes and edge treatments. We work with homeowners, architects, interior designers, and multi-unit developers to design, construct, and install ergonomic modern kitchens, baths, closets, and living areas along with complementary luxury furniture.

Oldest family-owned German kitchen manufacturer. Highest quality and greatest variety of finishes in German kitchen furniture, home living solutions, and Schmalenbach luxury closets. Our diverse materials and finishes can be made completely unique using processes to alter or colorize for a one-of-a-kind kitchen, living room, office, or closet. Visit our Scottsdale showroom to discover the beauty that precision and modern cabinetry with amazingly useful drawers and accessories can bring to your cooking and food prep areas, living areas, and closets. Unique quality raw materials. Innovative style and function. Limitless color choices, unique cabinet materials such as stone, steel, and specialty veneers with innovative, original finishes and edge treatments. We work with homeowners, architects, interior designers, and multi-unit developers to design, construct, and install ergonomic modern kitchens, baths, closets, and living areas along with complementary luxury furniture.


Avatar for RemodAZ

RemodAZ

2.33(
6
)

RemodAZ

2.33(
6
)
6 years of experience

We are an up and coming Home Remodeling company specializing in HVAC, Replacement Windows, Baths, and so much more. I welcome you to send an email or give us a call anytime. We are very flexible with scheduling and have installers and salesman with over 25 years of experiencing.

"We had accidentally broken a window while doing some remodeling in our kitchen and called RemodAz and a couple other window companies for competitive bids. We ended up signing a contract in October 2020 as we were told by the sales guy they would only take 6-8 weeks to get the job done, and they could do it faster than the others, because if we order now he can get the windows in as part of a large order for a local builder. At the end of December – with no communication other than me constantly inquiring where my windows are, they said they are having sourcing issues due to covid and could not give me an update, but could get me more information the next week after a call with the manufacturer, which I still didn’t get a call and was told it was my fault for not understanding that “next week” isn’t “next week” – it was the week after next week. Since we were adding a large sliding door and we had tile removed, we could not finish flooring until the door was in, so we had to keep deferring that install because we couldn’t get RemodAz to commit. Finally, towards the end of January they were out to install and man what a mess that was. Replacing 5 windows in the kitchen with two side windows and a plate glass window; replacing a window and a sliding glass door with a double slider; and then two windows in the front of the house. All with all aluminum frames, new windows and doors which is great because this matches the rest of the house. The door installation required a new header and some wire re-routing, and they wanted to just tie new wires with the old in the wall cavity which is not legal. I made them put a junction box in and I don’t think the way they crammed 8 wires into a double gang box was legal either but oh well. The new header goes in, and the opening is incorrectly sized for the door and it’s also sticking out a full inch on the left side into the room. 1 inch past the interior drywall and it’s clearly at an angle. They called a drywall guy out to patch the walls and he just laughed and left. They end up shaving the header down and just crumpled up some insulation and stuffed it in holes vs actually putting it into the wall cavity completely. I ended up redoing the insulation myself, oh and also had to supply the insulation and most of the wood myself along with quite a few tools. They ended up having an electrician come out to wire the new switches, and this was before the drywall went on, so the next set of drywall crew cuts new drywall around the switches (not the box) which made a 1/2 inch gap around the box. When I went to install the faceplate, it was impossible. I had to cut the drywall out from around the switch and redo it properly as well. They spent about 5 days out here to install 5 windows and 1 door. The fit and finish on the aluminum is really bad. There are paint issues and gaps in the frame, and the windows and slider are really hard to operate. I checked for plumb and the slider and a couple of windows are tweaked which, well, makes them really hard to open and close. They also broke one of the windows while installing it and told me they ordered a replacement at the same time. This is the replacement of the window that I broke - causing the whole window replacement thing to happen in the first place. Then nothing from them for about a month. They finally coordinated to have someone from the manufacturer come out who also confirmed that the windows were incorrectly installed and out of plumb – but he sprayed some silicone and called it good (which really didn’t help). He did nothing with the broken glass or the sliding door which has major paint defects and is poorly built and installed. Then nothing again until May. That’s when the fun really started. I get a call from Anna saying the manufacturer no longer sells aluminum frames (5 months AFTER the replacement window was “ordered”) and asked me if they could just replace the defective windows with vinyl, which I said if that were the case, they would need to replace all the windows with vinyl, so it wasn’t a mismatch in the same room at least. She didn’t say anything other than she was just the messenger, to which I told her I would like to talk to someone who can actually make decisions and speak for what the company is doing. We are dealing with fair amount of money in windows here, so I expect good quality and consistency, not windows and door that mismatched and hard to open. Then nothing again for another month. I finally got a text on the 10th letting me know Tammy was coming out with the glass guy, and it was confirmed between 10-1 on the 16th of June. June 16th comes and goes. No one comes out - and we are home all day, so this wasn’t a missed connection. This was no call no show from them. Well, fast forward to today (June 22nd). I get another text from Anna threatening to take me to court over not being able to complete the work. This is 9 MONTHS after I chose them, after they said they ordered the defective windows to replace the junk they installed, coming back 6 months afterwards saying they can’t get them anymore, saying they will come out with the guy from the glass company and then not show up. At this point I haven’t been able to finish inside around the broken windows and I would like to finish putting my house back together - I can’t keep waiting for the messenger to figure out the next delay tactic and am being forced to find another company to fix their mistakes. I reiterated to the threatening text that I need someone who can actually make decisions to contact me (now via text ONLY since everything will have to be in writing going forward). It’s been 5 hours and still nothing – maybe I can provide an update here in another month? If you chose this company – this is what you will get. Crappy service, horrible product and threats. And the window that started this all, even having been replaced, IS STILL BROKEN! Good luck!"

Jerry K on June 2021

We are an up and coming Home Remodeling company specializing in HVAC, Replacement Windows, Baths, and so much more. I welcome you to send an email or give us a call anytime. We are very flexible with scheduling and have installers and salesman with over 25 years of experiencing.

"We had accidentally broken a window while doing some remodeling in our kitchen and called RemodAz and a couple other window companies for competitive bids. We ended up signing a contract in October 2020 as we were told by the sales guy they would only take 6-8 weeks to get the job done, and they could do it faster than the others, because if we order now he can get the windows in as part of a large order for a local builder. At the end of December – with no communication other than me constantly inquiring where my windows are, they said they are having sourcing issues due to covid and could not give me an update, but could get me more information the next week after a call with the manufacturer, which I still didn’t get a call and was told it was my fault for not understanding that “next week” isn’t “next week” – it was the week after next week. Since we were adding a large sliding door and we had tile removed, we could not finish flooring until the door was in, so we had to keep deferring that install because we couldn’t get RemodAz to commit. Finally, towards the end of January they were out to install and man what a mess that was. Replacing 5 windows in the kitchen with two side windows and a plate glass window; replacing a window and a sliding glass door with a double slider; and then two windows in the front of the house. All with all aluminum frames, new windows and doors which is great because this matches the rest of the house. The door installation required a new header and some wire re-routing, and they wanted to just tie new wires with the old in the wall cavity which is not legal. I made them put a junction box in and I don’t think the way they crammed 8 wires into a double gang box was legal either but oh well. The new header goes in, and the opening is incorrectly sized for the door and it’s also sticking out a full inch on the left side into the room. 1 inch past the interior drywall and it’s clearly at an angle. They called a drywall guy out to patch the walls and he just laughed and left. They end up shaving the header down and just crumpled up some insulation and stuffed it in holes vs actually putting it into the wall cavity completely. I ended up redoing the insulation myself, oh and also had to supply the insulation and most of the wood myself along with quite a few tools. They ended up having an electrician come out to wire the new switches, and this was before the drywall went on, so the next set of drywall crew cuts new drywall around the switches (not the box) which made a 1/2 inch gap around the box. When I went to install the faceplate, it was impossible. I had to cut the drywall out from around the switch and redo it properly as well. They spent about 5 days out here to install 5 windows and 1 door. The fit and finish on the aluminum is really bad. There are paint issues and gaps in the frame, and the windows and slider are really hard to operate. I checked for plumb and the slider and a couple of windows are tweaked which, well, makes them really hard to open and close. They also broke one of the windows while installing it and told me they ordered a replacement at the same time. This is the replacement of the window that I broke - causing the whole window replacement thing to happen in the first place. Then nothing from them for about a month. They finally coordinated to have someone from the manufacturer come out who also confirmed that the windows were incorrectly installed and out of plumb – but he sprayed some silicone and called it good (which really didn’t help). He did nothing with the broken glass or the sliding door which has major paint defects and is poorly built and installed. Then nothing again until May. That’s when the fun really started. I get a call from Anna saying the manufacturer no longer sells aluminum frames (5 months AFTER the replacement window was “ordered”) and asked me if they could just replace the defective windows with vinyl, which I said if that were the case, they would need to replace all the windows with vinyl, so it wasn’t a mismatch in the same room at least. She didn’t say anything other than she was just the messenger, to which I told her I would like to talk to someone who can actually make decisions and speak for what the company is doing. We are dealing with fair amount of money in windows here, so I expect good quality and consistency, not windows and door that mismatched and hard to open. Then nothing again for another month. I finally got a text on the 10th letting me know Tammy was coming out with the glass guy, and it was confirmed between 10-1 on the 16th of June. June 16th comes and goes. No one comes out - and we are home all day, so this wasn’t a missed connection. This was no call no show from them. Well, fast forward to today (June 22nd). I get another text from Anna threatening to take me to court over not being able to complete the work. This is 9 MONTHS after I chose them, after they said they ordered the defective windows to replace the junk they installed, coming back 6 months afterwards saying they can’t get them anymore, saying they will come out with the guy from the glass company and then not show up. At this point I haven’t been able to finish inside around the broken windows and I would like to finish putting my house back together - I can’t keep waiting for the messenger to figure out the next delay tactic and am being forced to find another company to fix their mistakes. I reiterated to the threatening text that I need someone who can actually make decisions to contact me (now via text ONLY since everything will have to be in writing going forward). It’s been 5 hours and still nothing – maybe I can provide an update here in another month? If you chose this company – this is what you will get. Crappy service, horrible product and threats. And the window that started this all, even having been replaced, IS STILL BROKEN! Good luck!"

Jerry K on June 2021


Avatar for Integrative Renovations llc

Integrative Renovations llc

No reviews yet

Integrative Renovations llc

No reviews yet

19 years experience in cabinet installation, trim work, waynescotting, doors and windows. I'm a small business with little overhead, which makes me very competitive! I value doing a great job for my clients more then anything else. Free estimates always, no job too big or too small. Licensed and llc. Thanks, Steven

19 years experience in cabinet installation, trim work, waynescotting, doors and windows. I'm a small business with little overhead, which makes me very competitive! I value doing a great job for my clients more then anything else. Free estimates always, no job too big or too small. Licensed and llc. Thanks, Steven


The Valley's Handyman

5.00(
1
)

The Valley's Handyman

5.00(
1
)
Customers say: Quick response
Recommended by 100% of Angi customers
Recommended by 100% of HomeAdvisor customers

I provide a wide range of services with an emphasis on high quality and dependability. I will give you the professional results that you expect through my expertise and outside resources. Establishing a positive relationship with my customers within the context of providing a professional result. It is satisfying knowing that a job well done derives repeat business and future customers.

"Chris was very professional. He had great communication and did what he said he would do. He stayed true to his quote and worked very quickly and efficiently. I would definitely recommend him to my friends and family."

Carrie B on March 2020

I provide a wide range of services with an emphasis on high quality and dependability. I will give you the professional results that you expect through my expertise and outside resources. Establishing a positive relationship with my customers within the context of providing a professional result. It is satisfying knowing that a job well done derives repeat business and future customers.

"Chris was very professional. He had great communication and did what he said he would do. He stayed true to his quote and worked very quickly and efficiently. I would definitely recommend him to my friends and family."

Carrie B on March 2020


Tanzillo and Son

No reviews yet

Tanzillo and Son

No reviews yet
12 years of experience

Tanzillo and son is a locally owned and operated family business specializing in custom carpentry builds, and home remodel. Our Employees include licensed contractors, master carpenters, and welders.

Tanzillo and son is a locally owned and operated family business specializing in custom carpentry builds, and home remodel. Our Employees include licensed contractors, master carpenters, and welders.


MG Millwork Designs

5.00(
6
)

MG Millwork Designs

5.00(
6
)
Customers say: Quick response
Recommended by 100% of Angi customers
Recommended by 100% of HomeAdvisor customers

MG Millwork Designs is a licensed and bonded residential and commercial contractor in the cabinet, countertop, interior doors/trim and all finish carpentry fields. We have over 25 years of experience and can handle all your finish carpentry needs.

"It went great. Marco very nice professional and good price. quality work I would definitely reach out to Marco again if I ever need some more work. Thank you!"

Elizabeth M on February 2021

MG Millwork Designs is a licensed and bonded residential and commercial contractor in the cabinet, countertop, interior doors/trim and all finish carpentry fields. We have over 25 years of experience and can handle all your finish carpentry needs.

"It went great. Marco very nice professional and good price. quality work I would definitely reach out to Marco again if I ever need some more work. Thank you!"

Elizabeth M on February 2021


Avatar for J Display Case

J Display Case

5.00(
84
)

J Display Case

5.00(
84
)
Customers say: Quick response
Recommended by 100% of Angi customers
Recommended by 100% of HomeAdvisor customers

We are a custom acrylic fabrication shop with stock designs also shown on our website. Our quality is the finest in the acrylic industry. Display cases, wall cabinets, display covers and bases for antiques, model ships, collectibles, and turntables. Safely packaged and shipped to your door. We ship to all of the US states and cities in 48 contiguous states. Email or call us for a free quote 1 800-971-6276.

"I have been a customer/consumer for many years. The products are manufactured to the very highest quality possible. Packing & shipping are the Industry Standards. Customer Service is the benchmark of the business. Every company should use J Display Case as their Business Model ! Kudos !!!"

Art W on August 2024

We are a custom acrylic fabrication shop with stock designs also shown on our website. Our quality is the finest in the acrylic industry. Display cases, wall cabinets, display covers and bases for antiques, model ships, collectibles, and turntables. Safely packaged and shipped to your door. We ship to all of the US states and cities in 48 contiguous states. Email or call us for a free quote 1 800-971-6276.

"I have been a customer/consumer for many years. The products are manufactured to the very highest quality possible. Packing & shipping are the Industry Standards. Customer Service is the benchmark of the business. Every company should use J Display Case as their Business Model ! Kudos !!!"

Art W on August 2024

...
Showing 1-10 of 116
Cabinet Making questions, answered by experts

The Janka Hardness Scale rates wood species according to their hardness levels or density. On the scale, hickory ranks as the most dense hardwood that is common for use in making cabinets. While there are woods that are harder, they're uncommon in cabinetry. Maple, oak, and walnut also rank relatively high on the scale and are excellent for use in cabinetry. 

The vinyl finish on thermofoil cabinets makes them durable and scratch-resistant, especially compared to painted cabinets. However, if they do get deep scratches, it can be challenging to fix, and you may be unable to repair them.

Clean regularly, avoid harsh chemicals, and address scratches or dents promptly to preserve their appearance.

The ⅓ rule for cabinet hardware refers to selecting the best-sized pulls for your cabinets. Look for hardware with a length of about ⅓ the height of the door and ⅓ the width of the drawer.

Because of their location, kitchen cabinets are susceptible to water damage from sinks and household appliances like refrigerators and dishwashers. The back wall of kitchen cabinets is often obscured by its contents, making it harder to detect water seeping through the floor and into the unit from plumbing, window leaks, and broken appliances. When the water isn’t immediately dried and is left to sit there, it penetrates the cabinets and leaves them damaged.

The Marana, AZ homeowners’ guide to cabinet making services

From average costs to expert advice, get all the answers you need to get your job done.