Get matched with top painters in Hualapai, AZ

While the answer varies based on weather, 10 a.m. is a good time to start painting. The dew will have dried, meaning there’s no moisture on the house, and the temperature will likely be moderate and the sunlight less direct. Starting mid-morning should also give you enough daylight and pleasant weather to work on the job for several hours.

It’s best to use an exterior latex acrylic paint to promote maximum adhesion to composite decking. This flexible paint type can better cope with the natural expansion and contraction that can occur with composite deck boards. Oil-based paints won’t adhere as effectively and are more likely to crack and peel as the boards flex. Testing whether your chosen paint will stick on an inconspicuous section or a spare board is a good idea.

A finishing layer is an important step in the staining process. A top coat helps make a stain last longer by protecting it from spills, scratches, and natural weathering.

A lacquer finish is thin, fast-drying, and best used for cabinets, molding, and trim. It’s not recommended for outdoor furniture. Another option is varnish, which has a glossy finish with a protective film and is often used on outdoor wood objects. Polyurethane, known as “liquid plastic,” dries quickly but doesn’t hold up well in the heat. Lastly, a shellac finish adds a warm tint to wood but is affected by heat.

You should use three coats of paint when applying to a heavily textured or porous surface. Sometimes painting a lighter color over a darker color requires three coats of paint or more to achieve full, even coverage. Trim or baseboards should also get three coats of paint.