Get matched with top pre-made cabinet pros in Goodyear, AZ

If your cabinets don’t reach the ceiling, you can extend them higher, adding visual interest, privacy, and storage space to your kitchen. Depending on the height of your ceiling, you may want to extend the structure of the cabinets and install longer doors to make each individual cabinet taller, or you could add additional cabinets above the existing ones. Either option is cheaper and easier than installing entirely new cabinets.

The 1/3 rule is a design guideline used by interior designers and cabinet installers to select appropriately sized pulls for cabinets and drawers. The rule suggests that for a balanced and cohesive look, a cabinet pull should be approximately one-third the height of the cabinet door or one-third the width of the drawer face. This guideline helps create a symmetrical appearance because the human eye tends to follow the length of the pull across the cabinet face.

While the 1/3 rule is a helpful starting point, it is not the only option. If a measurement falls between available pull sizes, it's generally best to size up. For an ultra-contemporary aesthetic, you can also opt for full-width pulls that span the entire drawer.

There are three primary ways to attach upper kitchen cabinets to a wall, and installers may use more than one method at a time. The most common method is to drive screws through the back of the cabinets and into studs in the wall behind. Sometimes cabinets are glued to the wall with strong adhesive. Often a combination of screws and adhesive is desirable. The last way is by hanging the cabinets on hardware brackets that attach to the wall before cabinet installation.

Yes, many services include the removal and disposal of old cabinets. Confirm with your contractor.