Get matched with top electricians in Gibson, AR

It can be safe to buy or live in a house with knob and tube (K&T) wiring, but only if the system is in good condition, functional, and has been thoroughly inspected and approved by a licensed electrician. Never purchase a home with K&T wiring without getting a professional electrical inspection first.

Key considerations include:

• Safety and Condition: An inspector will verify that the wiring is safe and has not deteriorated. Over time, the insulation can wear away, leaving exposed wires that pose a significant fire or shock hazard.

• System Capacity: The electrical service should be at least 60 amps. However, even at this capacity, K&T systems often struggle to handle the demands of modern appliances and electronics.

• Lack of Grounding: Knob and tube wiring is an ungrounded system, which is a safety concern for many modern devices.

• Ongoing Maintenance: If you live in a home with K&T wiring, it's recommended to have it inspected by an electrician every one to two years to ensure it remains in safe working order.

Ultimately, any inspection or modification of a knob and tube system should always be performed by a certified professional.

Yes, a dead outlet can be dangerous and may cause a fire. The lack of power can be due to a hazardous electrical issue that poses a fire risk. If you notice a burning smell, discoloration, or sparks from a non-working outlet, it is a serious issue. It is vital to have a professional electrician investigate and fix the problem as soon as possible.

If it’s called a USB outlet without any further designation, it likely refers to a USB-A port. These are the original USB connections and are commonly integrated within power outlets. In recent years, USB-A cables have slowly been usurped by faster and more reliable USB-C cables. USB-C connectors are small and ultra-thin with a reversible design, while USB-A connectors are slightly larger and bulkier.

You can run a small or basic standard-size refrigerator on a 15-amp circuit. But you should plug a modern, standard-size refrigerator into a 20-amp dedicated circuit. The refrigerator needs to be on a dedicated circuit, meaning it is the only appliance and outlet on that circuit breaker. This method prevents tripping the breaker and reduces the chance of an electrical fire.