Get matched with top door pros in Centerton, AR

No, exterior doors don’t need to be prehung, although choosing a door that is prehung makes the installation process far easier. Installing an exterior door that isn’t prehung requires carefully maneuvering the heavy door into place in your door frame, making sure it’s level and plumb on all sides, and then attaching the hinges so that they’re perfectly level and are affixed to the right part of your frame and door. Prehung exterior doors are far more DIY-friendly.

Barn doors do not always require a bottom track, especially if a high-quality top track is used to stabilize the door. However, a bottom track is often recommended to ensure the door operates smoothly, prevent it from scratching the floor, and keep it from pushing inward or outward, which could cause damage. A bottom track also keeps the door more secure and properly anchored. In some cases, an interior barn door can hang solely from a top track without a bottom guide. If you do install a bottom track, it should be placed six to eight inches from the floor and be at least twice as wide as the door.

The best direction for a gate to swing depends on its location and purpose, but swinging inward is the general rule. An inward swing is often considered safer, prevents the gate from opening into public spaces like a sidewalk, and may be required by local building codes.

There are exceptions and specific considerations. If your property is on a slope, an inward swing might not be possible. For a deck gate, it's safest to have it swing away from any steps. In a backyard, the direction can be a matter of preference, though an inward swing can be helpful when carrying heavy items like a wheelbarrow into a garden.

Regardless of direction, ensure the gate can open fully without hitting any objects or blocking spaces. While an inward swing is standard, a gate that can swing both in and out offers the most flexibility if your setup allows for it.

You can convert a pre-hung door into a Dutch door, but it’s more of a pain. Pre-hung doors are already set in the frame with the hinges and everything aligned, so once you cut the slab in half, you’ll likely need to adjust the hinge placement and maybe even mess with the frame itself. It’s doable, but expect some trial and error because it’s not a straight-swap situation.