Get matched with top door pros in Noel, MO

You can determine what size storm door you need by measuring for the storm door. Take the width at the top, middle, and bottom of either your front door or an existing storm door, then measure the height on the left, center, and right of the door. Buy a storm door that matches your measurements' smallest width and shortest height.

The best direction for a gate to swing depends on its location and purpose, but swinging inward is the general rule. An inward swing is often considered safer, prevents the gate from opening into public spaces like a sidewalk, and may be required by local building codes.

There are exceptions and specific considerations. If your property is on a slope, an inward swing might not be possible. For a deck gate, it's safest to have it swing away from any steps. In a backyard, the direction can be a matter of preference, though an inward swing can be helpful when carrying heavy items like a wheelbarrow into a garden.

Regardless of direction, ensure the gate can open fully without hitting any objects or blocking spaces. While an inward swing is standard, a gate that can swing both in and out offers the most flexibility if your setup allows for it.

While not strictly required, it is highly recommended to shim both sides of a door. Shimming both sides allows you to make minor adjustments for wall framing that isn't perfectly plumb, ensuring the door is level and hangs evenly. This practice helps the door swing open and close smoothly, reduces the chances of the frame warping, and can be used to center the door within the wall opening. If you are working alone, you may find it easier to remove the door slab to lighten the weight while supporting the frame and inserting the shims. With two people, the process is generally faster and easier, whether the slab is left in place or not.

Standard door sizes aren’t one-size-fits-all, but there are common go-to dimensions. For exterior doors—like your front door—36 inches wide by 80 inches tall is typical, though you’ll see 30- or 32-inch widths too, especially in older homes. Interior doors vary more. Bedrooms and bathrooms often use 30- to 32-inch widths, and closet doors can be anything from slim singles to wide bi-folds. Height is usually 80 inches across the board; however, always measure your actual opening. “Standard” only works if it matches what’s already in place.