Get matched with top plumbers in Riverside, AL

In most areas, drain cleaning professionals don’t technically need a license, as they aren’t altering your plumbing system in any way. However, we recommend hiring a drain cleaning professional with a plumbing license and certification. Certified plumbers are more likely to provide professional solutions to drain clogs without damaging your system. They’ll also have the diagnostic tools and experience necessary to remove the clog entirely rather than providing a temporary solution, as a handyperson might. Use Angi’s state licensing tool to check your plumber’s professional licenses before hiring.

When positioning a pot filler, it should be mounted at a height that allows for convenient access without obstructing the cooking area. A general guideline is to place it 18 to 24 inches above the stove. For a more customized height, measure your most-used pots and install the filler 5 to 10 inches above your tallest one. Regarding horizontal placement, while centering the pot filler can be aesthetically pleasing and ensure it reaches all burners, it is often safer to install it to the left or right of the cooking surface. This placement helps you avoid reaching over a hot stove and reduces the risk of the filler itself getting hot from a large boiling pot. If you do choose to center it, be careful to avoid burns.

Many parts of your plumbing system can fail, but clogged drains are one of the biggest plumbing problems you’ll likely encounter. From your kitchen sink, bathroom sink, or bathtub, there are plenty of opportunities for gunk, hair, food scraps, and more to get stuck in drains. When this happens, water will slowly drain, leading to standing water, bad odors, drain flies, and other issues.

Many homeowners can handle a minor clog themselves, but if you have a clog in your main line, you’re best off hiring a local plumber to get the drain back to its normal flow rate.

You can fix a leaking outdoor spigot by replacing the washer, tightening the bonnet, or replacing the spigot altogether. Turn off the water supply and open the spigot to see the issue. You may need to tighten the bonnet by 1/8- to 1/4-inch of a turn. You might also need to see if the washer is damaged or worn. If those fixes don’t stop the leak, you should replace the outdoor spigot. Consider a frost-proof sillcock to prevent future freezes and leaking.