Get matched with top countertop and backsplash pros in Dora, AL

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

Terrazzo is considered an eco-friendly and sustainable material because it is often made from recycled materials, such as chips of glass, marble, or polished metal, which helps reduce waste. While the epoxy resin used as a binder has its own environmental impact, it requires relatively low energy for production and does not release volatile organic compounds (VOCs) once fully cured, which helps lower the overall carbon footprint.

Start your search for a reliable countertop contractor online, and look for companies that have high ratings from past customers. Check each of these companies on the Better Business Bureau website and rule out any that have a high number of complaints or an overall low rating. Next, contact the remaining companies and ask for a list of references and examples of past work. It’s best to choose a provider that has references that are still pleased with the work years later and one that provides professional-looking examples of how it serves its customers.

Epoxy is typically more affordable than granite, especially if you’re choosing a high-end slab. Most granite countertops cost $75 to $145 per square foot to install, with high-end varieties topping $185 per square foot. 

In contrast, epoxy countertops cost $50 to $150 per square foot to install. The material costs for epoxy are significantly lower than granite, but installation costs can be higher. Rather than simply cutting granite countertops to size before installation, your contractor will need to carefully pour the epoxy over an existing surface.