Best countertop and backsplash pros near Sumiton, AL

New countertops can last for anywhere between 15 and 50 years, with the exact lifespan depending on the material:

• Quartz: 50 to 100 years

• Marble: 50 to 100 years

• Granite: 50 to 100 years

• Laminate: 15 to 20 years

• Concrete: 20 to 30 years

• Tile: 40 to 100 years

Keep in mind some materials are more likely to stain and chip than others, which is an important factor to consider when it comes to the longevity of your countertops. Some materials also need special cleaning and maintenance, like tile countertops, which need grout cleaning, and concrete countertops, which need resealing.

For most homeowners, quartz and quartzite countertops are similar in price. The average quartz countertop installation costs $80 to $220 per square foot, while quartz countertops cost $70 to $200 per square foot. Of course, there are outliers, like if you choose a highly customized, rare natural stone with high-end finishes.

Porcelain is a relatively affordable, mid-range countertop material. It typically costs between $50 to $70 per square foot.

Compared to quartz, porcelain is slightly more affordable, as quartz generally ranges from $50 to $200 per square foot. However, lower-quality, builder's grade quartz can be similar in price to porcelain.

Compared to granite, the price can be similar, depending on the quality of the stone. While granite slabs can range from $50 to $200 per square foot, you can find lower-end granite in the same price range as porcelain. High-end granites will cost significantly more.

Porcelain is generally more expensive than laminate, acrylic, and ceramic, but less expensive than high-end slate, concrete, and marble. A key benefit is that porcelain does not require sealing, which reduces long-term maintenance costs.

The angle at which you cut countertops depends on the material, your intended outcome, and the location of the cut. For example, rather than cutting a straight 90-degree angle for internal corners, cut edges at a 45-degree angle to give a clean, professional look. For outside edges, most homeowners want squared-off sides, so 90-degree angles can make the most sense there. Because you want to get angles exactly right to minimize seams and eliminate the need for patching, be sure to measure several times before cutting and use the right equipment to get sharp, accurate angles.