Get matched with top countertop and backsplash pros in Kimberly, AL

If you are building a laminate countertop from scratch, instead of buying premade laminate countertops, you can use particle board underneath the laminate. You will need to use a sheet of particle board for the substrate, along with four-inch strips underneath the edges. For proper installation, make sure that any seams are level and use a sander as necessary before installing the laminate.

Comparing engineered stone vs. natural stone countertops can help you figure out if one is better than the other for you. The answer depends on your preferences, needs, and budget. You might choose engineered stone if you are looking for something more cost effective and low maintenance, but it is hard to beat the beauty of natural stone counters. You may prefer their longer lifespan, the uniqueness of each slab, and their durability.

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

The timeline to install countertops largely depends on the materials and the job size. Installing granite countertops takes anywhere from two to seven hours, though complex designs can pass the eight hour mark. Average-sized quartz countertops take two to five hours to install, though most pros will recommend a 24-hour settling period. Marble, on the other hand, is finicky and can take up to two whole days to install. No matter how you slice it, however, a professional is going to complete the job much quicker than an amateur.