Best countertop and backsplash pros near Mount Olive, AL

Epoxy is typically more affordable than granite, especially if you’re choosing a high-end slab. Most granite countertops cost $75 to $145 per square foot to install, with high-end varieties topping $185 per square foot. 

In contrast, epoxy countertops cost $50 to $150 per square foot to install. The material costs for epoxy are significantly lower than granite, but installation costs can be higher. Rather than simply cutting granite countertops to size before installation, your contractor will need to carefully pour the epoxy over an existing surface.

The angle at which you cut countertops depends on the material, your intended outcome, and the location of the cut. For example, rather than cutting a straight 90-degree angle for internal corners, cut edges at a 45-degree angle to give a clean, professional look. For outside edges, most homeowners want squared-off sides, so 90-degree angles can make the most sense there. Because you want to get angles exactly right to minimize seams and eliminate the need for patching, be sure to measure several times before cutting and use the right equipment to get sharp, accurate angles.

It is not recommended to put a hot pan directly on a marble countertop. While marble is heat-resistant, it is not completely heat-proof, and extreme or prolonged exposure to high heat can cause discoloration, cracking, or chipping. Pans may also scratch or nick the surface. To protect your countertop and maintain its integrity, always use trivets or hot pads. Note that faux marble finishes do not resist heat and require protection from hot items at all times.

The timeline to install countertops largely depends on the materials and the job size. Installing granite countertops takes anywhere from two to seven hours, though complex designs can pass the eight hour mark. Average-sized quartz countertops take two to five hours to install, though most pros will recommend a 24-hour settling period. Marble, on the other hand, is finicky and can take up to two whole days to install. No matter how you slice it, however, a professional is going to complete the job much quicker than an amateur.