Get matched with top plumbers in Addison, AL

Shut-off valves, like any other piece of metal hardware, can corrode, age, get worn down, and eventually break or rust into place. Occasionally spray your shut-off valve with WD-40 to stall it from rusting. If it really gets stuck, a wrench and WD-40 will usually do the trick, but you will need to call a plumber if it’s completely unmovable.

You can buy pipe insulation materials in your local hardware store or in major home improvement stores. You can also shop for insulation online, where you may be able to more easily buy in bulk. When shopping, make sure you know your pipe's dimensions so you can buy the correct size of pipe insulation materials for your pipes.

That pesky faucet leak can have a few different causes, most of which are standard wear and tear that occurs over time, but that doesn’t make it any less annoying, especially when the energy bill hits:

• Old washer: A deteriorated washer or gasket is the most common cause of a leak. Luckily, it’s easy and affordable to fix.

• Old packing nut: There’s a chance the packing nut (located beneath the handle) is loose and simply needs tightening, or it has been worn down, stripped, and needs to be replaced.

• Freezing temperatures: The water sitting in your spigot over winter can freeze, expand, and lead to damage and leaks.

• High water pressure: High water pressure is hard on pipes over time and can cause cracks and leaks, too.

No, a larger well pressure tank will not increase or improve water pressure on its own. The pressure control on the well pump is what determines the water pressure in your home. However, a larger tank does offer other benefits. It can hold more water, allowing you to run it for longer before the pump needs to turn on. Because the pump cycles on and off less frequently, there is less stress and wear on the well system. This can lead to a longer lifespan for the pump and tank, and you may experience fewer pump-related issues that could affect your water pressure in the long run.

If you want to increase your water pressure, you can try one of the following solutions:

• Adjust the tank’s pressure settings to a higher PSI (pounds per square inch).

• Replace your current pump with one that has a higher flow rate (GPM).

• Install a water pressure booster pump in your plumbing system.

• For pressure fluctuations, consider replacing your current setup with a constant pressure system.