Get matched with top masons in Craig, AK

No, you shouldn’t lay bricks directly on dirt. While it might seem like a shortcut, it leads to a patio that shifts, sinks, and becomes a maintenance headache. Dirt expands, contracts, and erodes—none of which mix well with long-term stability. To build something that lasts, excavate the topsoil, compact a layer of crushed gravel, and add a coarse sand-setting bed. This layered base gives your bricks proper support, allows drainage, and helps block weeds from creeping through. Cutting corners here just means you’ll spend more time—and money—repairing your brick patio later.

Most of the time, you don’t need to seal brickwork and can save that money for another area of home improvement. But if your brick is cracking or you live in an area with a lot of excess moisture (either in terms of rain or freezes), sealing can extend the lifetime of your home. But, make sure you use a breathable sealant, like siloxane, to allow the moisture to evaporate on its own.

Certain towns and homeowner associations (HOAs) ban brick mailboxes because of the risk of obstruction. They are sometimes only permitted in cases where four or more homes share a mailbox. Homeowners may need to obtain special permits in some locations. One of the top masonry contractor hiring tips is to ask a local pro if they can show you examples of recent work that meets local code regulations.

Depending on the amount of soot present, you can vacuum some of it using a brush attachment on your vacuum cleaner. Then, remove the leftovers with a mild cleaner, such as dish soap or vinegar mixed with water. Before applying a cleaning solution, saturate the bricks with clean water to prevent the cleaner from penetrating beyond the surface and causing structural damage to the bricks.