Get matched with top door pros in Falling Waters, WV

You can convert a pre-hung door into a Dutch door, but it’s more of a pain. Pre-hung doors are already set in the frame with the hinges and everything aligned, so once you cut the slab in half, you’ll likely need to adjust the hinge placement and maybe even mess with the frame itself. It’s doable, but expect some trial and error because it’s not a straight-swap situation.

Kick plates are usually installed on the “push” side of a door, but there are plenty of reasons to install them on both sides. Interior kick plates can offer protection from pet scratches, doors being kicked closed, and even kids’ toys during enthusiastic play sessions. Consider what kind of use and abuse your door gets to determine which side or sides to install a kick plate on.

The best place to install a dog door is on an exterior door that leads to a fenced-in area of your rear yard. This position will let your dog go in and out as they need and still keep them safe in your yard when they’re outside. You should plan on installing the bottom of the doggie door a minimum of 3 inches above the bottom of your exterior door to maintain the structural integrity of the door, and never cut out a hole within 3 inches of exterior door glass.

Ideally, a gate should be able to swing both in and out. However, if it can only open in one direction, it is generally best for it to swing inward. This is often the safest option, especially for deck gates near steps, as you'll want the gate to swing away from the stairs. An inward swing also prevents the gate from opening into a public space, like a sidewalk, and can be more convenient when carrying heavy items like a wheelbarrow into a garden.

There are exceptions, however. The layout of your property may require a different approach. For example, if your property is on a slope, the gate may not be able to swing inward. You should also ensure the gate can open fully without colliding with any objects or blocking access to other areas. For a backyard garden gate where public access isn't a concern, the direction it swings is largely a matter of personal preference. Finally, always check your local building codes, as they may have specific requirements for which way a gate must swing.