Top-rated drywall insulation pros.

Get matched with top drywall insulation pros in Linden, WI

Enter your zip and get matched with up to 5 pros

Need a pro for your drywall insulation project in Linden, WI?

Select your specific project to find the pro for you.

Find Drywall insulation pros in Linden

Avatar for Shawn Saunders Insulation
Shawn Saunders Insulation
4.6(
59
)
Blown-In Insulation - Install or UpgradeInjection Insulation - Install

Serving Linden, WI and surrounding areas

Approved

In business since 1977

Free estimates

Emergency services offered

"when they finish the job, they clean up after themselves so there is no mess left behind. The project was top of the line. not only did they show up on time, they finished the project is 35 minutes from time of arrival to departure. I had them insulate the garage and breezeway attic. Very satisfied with the quality of their work and their friendly and courteous performance on the job."
 Roof Veiw
 Camera  filming Shane
 Walls Veiw
 Shawn Check over project
Extreme Makeover Project

+28

Response time6 days
16 neighbors recently requested a quote
Recommended by90%of homeowners
Avatar for Elite Insulators
Elite Insulators
4.8(
21
)
Injection Insulation - Install

Serving Linden, WI and surrounding areas

Approved

In business since 2016

Free estimates

Warranties offered

"Kyle wen above and beyond my expectations! Very professional and knowledgeable! Every business should have someone like Kyle. I would highly recommend Elite Insulators. I have other projects coming up and he is already hired! Lol! THANK YOU Kyle!!"
Cathedral Ceilings
Ceiling/Wall
Walls
Amish Ice Box
Amish Ice Box

+56

Response time2 days
Recommended by57%of homeowners
RetroFoam of Wisconsin Inc.
New to Angi
Blown-In Insulation - Install or UpgradeInjection Insulation - Install

Serving Linden, WI and surrounding areas

Approved (Corporate)

Free estimates

Credit card accepted

Offers commercial services

RetroFoam of Wisconsin specializes in RetroFoam injection foam insulation for existing walls, helping homeowners improve comfort and energy efficiency without the mess or disruption of a full remodel. Our insulation solution is designed to reduce drafts, help maintain consistent indoor temperatures, and make homes more comfortable year-round. We serve homeowners across the state. Whether you live in a historic home or a newer build, our team provides a proven insulation solution tailored to your needs.

77 neighbors recently requested a quote
Avatar for Airtight Insulation & Remodeling, LLC
Airtight Insulation & Remodeling, LLC
3.7(
32
)
Blown-In Insulation - Install or UpgradeInjection Insulation - Install

Serving Linden, WI and surrounding areas

In business since 2014

Free estimates

Emergency services offered

"They are very diligent and responsive. The project was very large and they worked hard at getting it complete on time and did a very nice job at cleaning up. Hardworking crew and took pride in their work. This was one of their largest jobs and did a nice job at following through and tiding up all the loose ends. If your are looking for a hard working crew that care about the job they do, I would definitely recommend this company for your spray foam insulation needs. You will not get a more fair price and hard working crew. Two thumbs up from me."
SPRAY FOAM OF CEILING
FRONT ENTRANCE OF SHANTY
SPRAY FOAM OF EXTERIOR CAVITIES
SPRAY FOAM OF EXTERIOR CAVITIES
NEW HOME CELLULOSE

+68

Response time2 days
Recommended by76%of homeowners
Avatar for American Home Shield – Home Warranty
American Home Shield – Home Warranty
3.5(
5,688
)
Blown-In Insulation - Install or UpgradeInjection Insulation - InstallInsulation - Install or Upgrade

Serving Linden, WI and surrounding areas

In business since 1971

Credit card accepted

"Well, the first time the replacement was ordered it was the wrong one, which of course, delayed the installation a week. When it was finally installed I had to pay an additional $850 for code upgrades. This I was not informed of by Home Shield. Then we noticed that there was water on the garage floor and found that the pipe coming in from the wall was leaking at the wall so had to call the plumbing company back out to fix it. They first tried to say it was not their fault but since there wasn't a leak before they installed they did fix it. I have used Home Shield a few times before and never had a problem. Some of the companies they use are not the best so you have to research them before you commit. I have found HS service to be good if you do your homework. At the end of the day I was without hot water for almost 3 weeks but it was do to the plumbing company they sent out."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+2

Recommended by65%of homeowners
Garcia's Insulation & construction
5.0(
1
)
Injection Insulation - Install

Serving Linden, WI and surrounding areas

In business since 2007

Free estimates

Garcia's Insulation and Construction, LLC is committed to excellence in every aspect of our business. We uphold a standard of integrity bound by fairness, honesty, and personal responsibility. Our distinction is the quality of service we bring to our customers. Accurate knowledge of our trade combined with ability is what makes us true professionals. Above all, we are watchful of our customers' interests and make their concerns the basis of our business.

Response time1 day
Recommended by100%of homeowners
Showing 1-10 of 17
Drywall Insulation questions, answered by experts

To hide drywall edges, you need to properly apply drywall tape and multiple layers of joint compound. These materials hide the seams between drywall sheets and fill the holes from drywall screws, leaving behind a smooth, flat finish to paint over. Apply joint compound smoothly, and finish the job by sanding the walls to make sure you fully hide drywall edges and other imperfections.

Depending on the place where the cutting error occurred, you may be able to fix it. Learning how to patch a hole in drywall is challenging, but if you can tape and mud drywall, you can do it. Having said that, patching is time consuming. Early in the installation process, you may find that it’s easier and far less time consuming to just start over with a new sheet of drywall, cutting a new hole in the right spot. You may be able to use part of the incorrectly cut piece elsewhere, so it’s not completely wasted.

There are six levels of drywall finish, from 0 to 5, that refer to the amount of work performed during the finishing process.

Level 0: Drywall is hung with no finishing work.

Level 1: Tape is placed over the seams between drywall sheets.

Level 2: A thin layer of mud is applied over the tape and screw holes. This level is common for utility rooms or walls that will be covered.

Level 3: A full coat of mud covers the screw holes and tape, but the surface is not sanded. This is often used in garages.

Level 4: This is the most common finish for visible interior walls. It involves applying two coats of mud over seams and screw holes, with sanding between each coat, creating a smooth surface ready for flat paint.

Level 5: This is a high-end finish for luxury homes. It includes full taping, mudding, and sanding, plus a final skim coat over the entire surface before painting.

Fixing ceiling nail pops involves similar steps to wall repair, with the major difference being the orientation of the work. Ceiling nail pops can be more challenging because you may need to work overhead, which can be physically demanding and require additional safety precautions. Additionally, the ceiling may have different materials or finishes, such as textured surfaces, which can affect the repair process. Otherwise, the fundamental steps are the same.

Yes, you can apply new plaster over an existing plaster surface, such as a wall or ceiling, provided the old plaster is in good condition. Before you begin, check the stability of the existing plaster. The surface must be clean, free of loose material, and have no peeling paint. It is also recommended to roughen the surface slightly to promote adhesion. For older plaster, applying a base coat like a PVA emulsion or a specific bonding agent or primer is crucial. This step makes the existing plaster less porous and ensures the new and old layers adhere properly for a smooth, long-lasting finish.

The Linden, WI homeowners’ guide to drywall insulation services

From average costs to expert advice, get all the answers you need to get your job done.