Get matched with top plumbers in Eden, WI

The first rule of plumbing is nothing but water, toilet paper, number one, and number two go down the drain. 

To prevent clogs, get yourself:

• A compast pail where you can clean plates, drain grease, and toss scraps and paper towels. 

• Drain screens for the shower, tub, and bathroom sink to stop hair, jewelry, toys, etc. from going down the drain.

• Trash cans for everything that shouldn’t go down the drain, like dental floss, hygiene products, and cat litter.

P.S.: If you do drop your priceless ring down the drain, take a deep breath, and then follow these steps to retrieve jewelry from your drain.

In North America, pipe measurements are listed as the nominal pipe size (NPS). This measurement refers to the outside diameter. As an example, a 1/2-inch copper pipe has an outside diameter of 5/8 of an inch. If a hardware store lists a pipe as having a 2 NPS, it means that all the pipes with this measurement have a 2 ⅜-inch outside diameter, regardless of wall thickness and inside diameter.

First, check that you have cut off the water supply to your toilet. This is a project that can only be done safely if running water cannot reach your toilet fixture. If you're seeing water trickle out after you've confirmed that the water supply is shut off, you can probably rest assured that what you're seeing isn't a problem. It's common for leftover water to spill out when you're removing your toilet's fill valve. If something goes wrong while you're working on your toilet, you'll need to look at your home's policy to see if your homeowner insurance covers water damage.

Yes, you can change a bathtub faucet without changing the valve, as long as the new faucet is compatible with your existing valve system. Most manufacturers design their faucet trims (handles and spouts) to work with their standard valve bodies. However, you'll need to match the new faucet to your valve type, whether it's a compression, cartridge, or ball-type valve. Mixing brands can be problematic, but you can bring your old faucet parts to the hardware store and ask about compatibility.