Get matched with top carpenters in Walla Walla, WA

"We enjoyed having him in the house working. Very professional , gave me some"homework" to complete first hus next visit. He was a little frustrated with the walk as it wasn't flush but is now for the patch that was put in."

"Omar and his partner did a great job installing LVP flooring in my home. They were fast and clean. I would hire them again."

"This contractor was recommended to me by another contractor that didn’t have the time for my project. Things that really stood out: 1. He was very thorough during our walk through and with his quote. 2. I had a vision of what I wanted and although I had pictures to help, he did a great job completing everything I asked and it was perfect. 3. The job was completed on time and was very reasonably priced. 4. When I wasn’t sure of the best product to use but knew what I wanted it to look like, he would offer options from lower priced, mid-range, and higher-end. Gave me pros and cons and left it up to me to choose, and I appreciated the options. The job was a remodel of the living room, dining room, and entryway. He replaced four windows and the front door. Closed off one wall and made the entry on another. Replaced the entryway closet with a built-in. The walls, ceiling, and trim were updated, installed, and painted. He also did the flooring"

"Found Sentri on Angi. Jeanette and Violet were very pleasant and efficient in getting a contractor to me in the time frame needed. The contractor was excellent and the roof looks great! I would definitely work with them again if I had additional projects."

Floor To Roof LLC provides reliable construction services in Walla Walla, WA, and the surrounding areas. Don't hesitate to contact us now!\n\nWe serve in Walla Walla, WA, Garrett WA; College Place WA; Milton-Freewater OR; Dayton WA; Waitsburg WA; and the surrounding areas.\n\nConstruction Service, Construction Contractor, Construction and Remodeling, Construction Specialist, Affordable New Home Construction\nQuality Construction Service, Reliable Construction Service, Expert Construction Service, Dependable Construction Service, Professional Construction Service

Riverside Exteriors specializes in commercial and residential siding installation in Idaho, Washington and Oregon. We exclusively install Mastic brand vinyl siding, steel siding, as well as James Hardie brand fiber cement siding. Our team has over 50 years of combined experience, and we bring the highest level of dedication and professionalism to each project. Call us today! We even offer financing!

"After purchasing an Angie's List Deal, I received the measuring kit in the mail promptly. The template and instructions provided to draw my split table top and each of the leaves were easy to use and understand. I mailed the completed materials and received the table pads very quickly. The table splits in the middle to allow insertion of up to 3 additional leaves. The table also has 2 drop leaves. That's 7 pads. All fit perfectly. I have used them on the table for family parties (not every day) and they're durable and built to last. I keep them in the box they arrived in to protect them when not in use. These are a worthwhile investment."

We're a locally owned and operated company with over 22 years of industry experience. We value honesty and integrity, and stand behind our work. We specialize in cabinetry installation, custom closets, interior trim and decorative molding installation, built-in furniture, and a variety of related projects. We pride ourselves on the quality of our work as well as our commitment to outstanding results. We look forward to building long-term relationships with our clients and guarantee your satisfaction!

"Hello, My name is Phil Carr-Jones, I am reviewing my experience of working with and building my own kitchen, using cabinets and doors from Arkansas Wood Door. While I am an Episcopal Priest, it turns out I get to do a lot of things they don't teach you in seminary. Over the years, I have had to get fairly skilled in all the trades, including, no surprise, carpentry. But I am by no means an expert. For instance, I employed a retired carpenter to help out with the crown molding and other trim. Apart from that though, this is all my and my wife's work. So let me state up front, Arkansas Wood Doors is the go to place for the DIY’er who is thinking of remodeling their own kitchen. Here's why: I searched the web for months, literally doing comparisons and research on flat pack rta cabinets. I went to the big box store for a design and pricing in their three lines of cabinets, and I went in for a consult with a small custom shop in my area. Here's what I found. 99 outof 100 rta cabinet companies have their product made in china which means the standards for formaldehyde are going to be as fishy as they smell, plus you can only get cabinets in fixed sizes so if you looking to eeck out every last inch of space you're going to lose a lot and you'll be using a lot of filler strips wasting what could have been useful storage. If you want to go custom, then you only have less than a handful of online options, companies that will make to order in any dimension. For instance, I only wanted an 8 inches deep spice cabinet to allow for greater working room over the counter. My wife and I are pretty serious about cooking from pastries to mains and sides. We want a very serious kitchen. Plus, I'll tall so I needed the room. In any case, if you want something custom your choices online are limited. The big box stores don't really do custom and are just as limited in their options as are the online rta places. Most online rtas offer far cheaply made boxes with construction methods less sturdy. I have found that if I buy cheap, I shouldnt expect my kitchen to hold up past a few years. The finish will fade. The drawers will warp. The joints will open up. The big box stores basically offer the same thing, too. When I go to a big box store to buy something, I do it knowing I probably willl get a year out of it, whether that’s a lawn chair of a power tool. I mean when was the last time you regretting spending too much money on a better grade of power tool? So if you want quality, a better and safer grade building material and much wider choices in sizing then your basically down to three or four options. I went with Arkansas Wood Door and am completely pleased and impressed by the experience. Now I could have spent twice what I did and gone to a small custom shop and gotten the same thing, but I am in to saving money and frankly I enjoy the challenge. AWD worked with me directly. Working up the order and getting the plan for each box just right. If you have never designed and built a kitchen before, there are plenty of tips and guidance on the web and I recommend you heartily research all of the aspects and complications involved. I hit a couple of unexpected bumps. But more about that below. So do your research. For instance you can save a lot of money by building the plinths yourself and only order squared off boxes without the toe kick. By making the platform on which you place the lower cabinets first, you can get that plumb and level, so throwing up the boxes is a breeze. And again, the cabinets are also less expense, a complete all around win. AWD uses an easy system for matching up box parts so assembly was easy. No special tools required. Given the many parts and I used a mix of frameless and face framed cabinets, there was a moment or two when in amongst all the materials I got nervous about having everything I needed, but low and behold, all was right there in the end. I also recommend the concept from French cooking "mis en place" that is have all your ingredients in place and all your tools where you need them before starting out. Also, it was a lot easier to work with my wife than doing it alone, but I did a few by myself and so if that is your only option than you should have no problem. I've assembled a lot of cheaper Swedish flat packed furniture in my day, and the quality and sturdiness of AWD leaves no doubt about how long these will last. Just rock solid. Great thing about AWD is the cost to quality ratio. Cant beat it. Which also means if you make a mistake the replacement is so reasonable it becomes not big deal. I mis-measured one box and so I needed to order the right size. Worked out fine, but that was because AWD had an incredibly fast turn around. The other few reliable companies are several weeks to months. And these other places are crazy expensive. And in truth, the other companies are a complete rip off on trim and accessories. AWD pricing was so amenable that my mistakes cost me so little in comparison with what I was saving. So there's a built in confidence for the first timer. Also AWD made one mistake on the placement of a hinge in two doors. They immediately and without question remade them and sent them out in under ten days. You just can't get that service anywhere in the custom cabinet world. It was so affordable I upgraded on one side to black walnut. Trying doing that at the other quality shops. The quality of the roll out drawers and top drawer boxes is superb and the hinges and under-mount sliders are top grade excellent. The hardware was the easiest part frankly. Their system, for lining up the hardware is just so easy. Drill driver is all you need as the placement is already leveled for you. SO: high end quality custom built cabinets, superior custom support, fastest turnaround in the marketplace, most affordable pricing out there, excellent hardware, and oh yeah, I almost forget, color choices. They offer complete line of lacquer - just pick a SW color and they'll match it. SO completely and truly custom for a fraction of cost without sacrificing any quality. The Rev. Philip Carr-Jones"

"It was okay but the woman who came out was a little bit too concerned about speaking her own mind and I do not think that the time frame was long enough for her to really get a grasp of what it was that we were looking to do. She had some good ideas but it was not enough to convince me to go further and purchase an additional time, however, we had a particularly challenging project. It was not like it was a simple little thing and I threw a lot at her. She was not particularly prepared when she came so we had to spend part of the time getting her prepared. I had sent her an email in advance with the pictures and everything and said, "Here, so that you are going to be thinking about this before our call." And when she got on there, she had not really done that. So, that took some of the time for me to go and say, "Okay, take a look at the email. Here are the pictures." She did not come ready to go with advice and that was a little bit disappointing. The advice that she had was good but it did not solve my problem and it did not convince me to purchase additional time. I was not unhappy with her. It just did not wow me. It was what it was and it was fine. She came out within the time frame that we purchased the deal because we had just purchased the house. We were living in North Carolina and we purchased the house in Florida. We moved on December 2nd so it was between the date that we purchased the deal and December 2nd because we had to talk to her about what we wanted to change about the house before we moved. Ours was not your typical project. If somebody came in and just showed her a picture of a room with blank walls and they wanted her to help decorate it, I think that she could do that but ours was pretty hard."