Get matched with top carpenters in Stanfield, OR

"I had a fantastic experience with the team from Rick's Custom Fencing & Decking, specifically the dynamic duo of Felix and Felix Jr. They installed a vinyl privacy fence in my backyard which was a bit tricky (on top of a retaining wall and had three gates). Felix and Felix Jr were extremely professional and courteous. They didn't leave a mess as they were working, and were 100% respectful of me and my property at all times. They had several minor questions throughout the build and paused their work to get my feedback; they clearly communicated what my options were at several key points, listened to my opinions and needs, and then continued with the build. As a woman homeowner, it means a lot to me that they listened and respected my feedback and input. I couldn't recommend this team enough - I would absolutely have them out again to do more work at my house if I needed it. If you're having a fence installed with Rick's, ask for Felix and Felix Jr - you will not be disappointed!!"

Welcome to Elk Head Construction (Formerly Call Mike,) your go-to source for top-notch handyman services and home improvement in Umatilla County! Our dedicated team specializes in delivering reliable and skilled home repair and maintenance solutions tailored to your specific needs.\n\nAt Elk Head Construction, customer satisfaction isn't just a goal – it's a guarantee. With years of experience, our skilled team is equipped to handle a variety of projects, from general maintenance to carpentry.\n\nWe stand behind our work and offer a satisfaction guarantee on all services. You can trust Elk Head Construction for efficient, friendly, and high-quality home repair services. Contact us today, and let us take care of your Pendleton home with expertise and a personal touch. \n\nFully licensed and insured. CCB #245126

We are dedicated to providing our clients with the very best in excavation and building site services. We specialize in residential and commercial services and take pride in the attention to detail put into each of the projects we're involved with. We're known for our quality work and the integrity of our business. We look forward to building long-term relationships with our clients, and guarantee your satisfaction.

At HW Brothers Handyman & Construction, we take pride in delivering quality workmanship, honest service, and reliable results. With years of experience in carpentry and construction, along with over a year of professional maintenance experience, giving the skills to handle a wide variety of home repairs and improvement projects. From drywall and trim work to door installation, fencing, deck repairs, painting, fixture installation, and general home maintenance, we focus on doing the job right the first time. We treat every home with respect, communicate clearly, and work hard to ensure every customer is completely satisfied. Whether it’s a small repair or a larger project, you can count on dependable service and quality craftsmanship.

GRADELINE CONSTRUCTION SERVICES is dedicated to providing our customers with the best quality and\ncraftsmanship. We are here to build relationships with our customers and communities and to provide\nour employees with a great place to work. We look forward to working with you!

Easy to work with, experienced and reliable.

"They were efficient in terms of the process. They sent the pad in a reasonable time frame. I did have to call a couple times. It took about a month to deliver. They sent the material which was packed nicely. There were 2 issues: 1-the glue or adhesive they used smelled badly. I had to put in my garage for a couple weeks until that 2-every corner was protruded, the table pad corners were too sharp on the mat .which poses risks with small children. I called about that and they said to put some tape over it. The manager called back to discuss the issue was. She suggested that I try to fix. it. The company might have done something to repair if I had followed up."

We pride our company on reliability, great communication, integrity, and quality work. We are experts in our trade and will do our best to keep you as educated as we can on your particular task or project. We look forward to earning your business!

"This project was for three bathroom remodels in a 1960 single level ranch - the bathrooms hadn't had much updating.  There was extensive wallpaper in two of them which had to be removed (this is a terrible job!) followed by wall prepping.  The powder room proceeded without any problems and was done quickly. The guest bath required a few changes that were unexpected, such as moving the door frame to accommodate a 32" tub instead of the 30" originally in place, and moving the vanity light box.  Greg and Donnell were always happy  to do whatever I wanted, and offered advise and tips along the way when unexpected things came up. 
The en suite bathroom was a big mess from extensive water damage that we didn't know about.  When Greg took down the tiles parts of the wall completely collapsed from water damage (and everything looked great on the outside).  The wood beams were rotten, the sub floor under the shower tray was rotten and almost completely unsupported, and once Greg removed the tile flooring we realized that all of the sub floor had water damage and needed to be replaced.  Greg was suspicious and went into the crawl space under the house to determine if additional damage was evident, and it was.  This is a 1960 ranch house that has a strange support structure with support beams further apart than is typical.  The entire bathroom was essentially unsupported with the exception of two screw jacks in place (we knew about this from the home inspection but it wasn't clear the extent of previous damage).  Greg built an entire new support structure under the bathroom & shower.   As an add on we had Greg insulate our water pipes and replace some of the fiberglass insulation under the house.

I was so pleased with the work and the overall attitude of Greg and Donnell that I decided to have them install two new skylights.  Right after purchasing the house I tried to have skylights installed but was told by the contractor that he couldn't install them because the HVAC ducts were in the way (they are flexible plastic, not metal).  When I mentioned this to Greg he laughed and said of course the ducts could be moved, they're flexible and extenders can by installed if necessary (it wasn't).  Now I have two beautiful skylights thanks to Greg & Donnell!

Overall I really appreciated the communications between Greg, Donnell, and me.  We typically used text messaging which I find very convenient, and they could send me photos along with questions while I was at work.  I am a bit of a control freak and Greg and Donnell were OK with my need to know what was going on, and immediately if problems arose.  I plan on having them back in the early winter to replace an ugly stone fireplace facing and do some work on my kitchen."

"Hello, My name is Phil Carr-Jones, I am reviewing my experience of working with and building my own kitchen, using cabinets and doors from Arkansas Wood Door. While I am an Episcopal Priest, it turns out I get to do a lot of things they don't teach you in seminary. Over the years, I have had to get fairly skilled in all the trades, including, no surprise, carpentry. But I am by no means an expert. For instance, I employed a retired carpenter to help out with the crown molding and other trim. Apart from that though, this is all my and my wife's work. So let me state up front, Arkansas Wood Doors is the go to place for the DIY’er who is thinking of remodeling their own kitchen. Here's why: I searched the web for months, literally doing comparisons and research on flat pack rta cabinets. I went to the big box store for a design and pricing in their three lines of cabinets, and I went in for a consult with a small custom shop in my area. Here's what I found. 99 outof 100 rta cabinet companies have their product made in china which means the standards for formaldehyde are going to be as fishy as they smell, plus you can only get cabinets in fixed sizes so if you looking to eeck out every last inch of space you're going to lose a lot and you'll be using a lot of filler strips wasting what could have been useful storage. If you want to go custom, then you only have less than a handful of online options, companies that will make to order in any dimension. For instance, I only wanted an 8 inches deep spice cabinet to allow for greater working room over the counter. My wife and I are pretty serious about cooking from pastries to mains and sides. We want a very serious kitchen. Plus, I'll tall so I needed the room. In any case, if you want something custom your choices online are limited. The big box stores don't really do custom and are just as limited in their options as are the online rta places. Most online rtas offer far cheaply made boxes with construction methods less sturdy. I have found that if I buy cheap, I shouldnt expect my kitchen to hold up past a few years. The finish will fade. The drawers will warp. The joints will open up. The big box stores basically offer the same thing, too. When I go to a big box store to buy something, I do it knowing I probably willl get a year out of it, whether that’s a lawn chair of a power tool. I mean when was the last time you regretting spending too much money on a better grade of power tool? So if you want quality, a better and safer grade building material and much wider choices in sizing then your basically down to three or four options. I went with Arkansas Wood Door and am completely pleased and impressed by the experience. Now I could have spent twice what I did and gone to a small custom shop and gotten the same thing, but I am in to saving money and frankly I enjoy the challenge. AWD worked with me directly. Working up the order and getting the plan for each box just right. If you have never designed and built a kitchen before, there are plenty of tips and guidance on the web and I recommend you heartily research all of the aspects and complications involved. I hit a couple of unexpected bumps. But more about that below. So do your research. For instance you can save a lot of money by building the plinths yourself and only order squared off boxes without the toe kick. By making the platform on which you place the lower cabinets first, you can get that plumb and level, so throwing up the boxes is a breeze. And again, the cabinets are also less expense, a complete all around win. AWD uses an easy system for matching up box parts so assembly was easy. No special tools required. Given the many parts and I used a mix of frameless and face framed cabinets, there was a moment or two when in amongst all the materials I got nervous about having everything I needed, but low and behold, all was right there in the end. I also recommend the concept from French cooking "mis en place" that is have all your ingredients in place and all your tools where you need them before starting out. Also, it was a lot easier to work with my wife than doing it alone, but I did a few by myself and so if that is your only option than you should have no problem. I've assembled a lot of cheaper Swedish flat packed furniture in my day, and the quality and sturdiness of AWD leaves no doubt about how long these will last. Just rock solid. Great thing about AWD is the cost to quality ratio. Cant beat it. Which also means if you make a mistake the replacement is so reasonable it becomes not big deal. I mis-measured one box and so I needed to order the right size. Worked out fine, but that was because AWD had an incredibly fast turn around. The other few reliable companies are several weeks to months. And these other places are crazy expensive. And in truth, the other companies are a complete rip off on trim and accessories. AWD pricing was so amenable that my mistakes cost me so little in comparison with what I was saving. So there's a built in confidence for the first timer. Also AWD made one mistake on the placement of a hinge in two doors. They immediately and without question remade them and sent them out in under ten days. You just can't get that service anywhere in the custom cabinet world. It was so affordable I upgraded on one side to black walnut. Trying doing that at the other quality shops. The quality of the roll out drawers and top drawer boxes is superb and the hinges and under-mount sliders are top grade excellent. The hardware was the easiest part frankly. Their system, for lining up the hardware is just so easy. Drill driver is all you need as the placement is already leveled for you. SO: high end quality custom built cabinets, superior custom support, fastest turnaround in the marketplace, most affordable pricing out there, excellent hardware, and oh yeah, I almost forget, color choices. They offer complete line of lacquer - just pick a SW color and they'll match it. SO completely and truly custom for a fraction of cost without sacrificing any quality. The Rev. Philip Carr-Jones"